541685
10
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: AMT-1
10
2.8 Winch
The winch is installed on an adjustable console. This
console is to be placed at two different locations in the
breadth direction in the front cross bar and in three
different positions in the longitudinal direction.
When the winch is not used it is possible to put the hook
of the winch trough the tie eye on the front beam. You
put the winch a little bit under pressure. With this there
is no tolerance between the console and the frame.
Scope of application
The winch is suitable for use as a trailer winch for the easy and shock-proof pulling of various loads. The maximum tractive force of the winch in the
lowest cable layer is 330 kg and 900 kg in the topmost cable layer. Only cables according to the regulations should be used.
Safety Information
Friction disk brake:
Minimum tractive force for perfect brake function: 25daN. If this minimum load does not exist the braking function does not take place!
Not approved for motor-driven operation!
Only touch the wire cables when wearing protective gloves!
The rope (belt) must only be wound up so far under load that a flanged wheel overhang of at least 1.5 x cable diameter is guarateed!
The cable must be wound round the drum an least twice under load!
Determine the fitting position so that when the winch is used the fleet angle is no more than 4˚.
Do not oil of grease the brake mechanism!
The cable winch must not be used for securing loads! (e.g. cars) Here the load requires separate lashing as the cable winch friction disk brake can be
loosened by vibration during the journey.
Operation
Lifting, pulling:
Turn the head crank clockwise.
Stopping:
The load can be stopped in any position by simply letting go of the crank.
Lowering:
Turn the cank anti-clockwise to lower the load. The automatic brake prevents the crand from kicking back (load pressure brake)
Attention:
The rope (belt) must only be wound up so far under load that a flanged wheel overhang of at least 1,5 x cable diameter is guarateed. This prevents the
winch from overload and stops the cable from running from the dum sideways. The cable must be wound rouend the drum at least twice under load.
Friction disk brake:
Minimum trative force for perfect brake function: 25daN. If this load does not exist the braking function does not take place! The cable (under load)
must be kept under slight tension for correct winding.
Maintenenance and cleaning
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Anssems AMT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Anssems AMT in de taal/talen: Engels als bijlage per email.

De handleiding is 5,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Anssems AMT

Anssems AMT Gebruiksaanwijzing - Nederlands - 18 pagina's

Anssems AMT Gebruiksaanwijzing - Deutsch - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info