669702
19
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
18
After sliding the icon,
the remote control interface will display EXIT and [ ]. Tap the [ ]
the icon will become [ ]. Then the journey function will be paused. When tapped again, the
[ ] will become [ ], the H920 PLUS will continue the Journey function. Exit the function
by tapping EXIT icon or switching flight mode.
NOTICE:
When the Journey function is activated, the Journey distance may be set by the
pilot.
NOTICE:
The gimbal camera cannot be controlled when journey function is activated and
will remain the previous angle set before. Depending on the camera tilt, the H920 PLUSwill
fly up and out to take the perfect self-shot, or “selfie”.
NOTICE: The journey route is the reverse direction to which the gimbal camera is facing.
1/3
2
ORBIT ME: When Orbit Me is enabled, H920 Plus flies a circular path around the pilot.
Press ORBIT to enter the ORBIT ME function.
START:
Press START, and slide the icon, push the aileron stick to the right or left. The H920
PLUS will fly around the pilot/ST16 with the distance between the start point and the pilot as
the radius.
BACK: Tap BACK to return to the previous interface.
NOTICE: You can increase/decrease radius by apply forward/back on right stick.
You also can trim the gimbal pan position by adjusting pan control knob on ST16 under
Follow or Follow controllable mode in Pan direction..
NOTICE: The tilt direction of gimbal camera can be adjusted by the camera tilt control knob.
NOTICE:
If the aircraft ies too close to the pilot, it will automatically enlarge the distance and
then begin to orbit.
NOTICE: Adjust the Throttle Control joystick to change the height of the aircraft, adjust the
Aileron Control joystick to change the orbit direction of the aircraft.
[ ]: When the pilot tap the [ ] the icon will become [ ]and the ORBIT ME function will
be paused. When tapped again, the [ ] will become [ ], the copter will continue the ORBIT
ME function. Exit the function by tapping EXIT icon or switching flight mode.
18
After sliding the icon, the remote control interface will display EXIT and [ ]. Tap the [ ], the icon will become
[ ]. Then the journey function will be paused. When tapped again, the [ ] will become [ ], the H920 PLUS will
continue the Journey function. Exit the function by tapping EXIT icon or switching ight mode.
NOTICE: When the Journey function is activated, the Journey distance may be set by the pilot.
NOTICE: The gimbal camera cannot be controlled when journey function is activated and will remain the
previous angle set before. Depending on the camera tilt, the H920 PLUSwill y up and out to take the perfect
self-shot, or “sele.
NOTICE: The journey route is the reverse direction to which the gimbal camera is facing.
ORBIT ME: When Orbit Me is enabled, H920 Plus ies a circular path around the pilot.
Press ORBIT to enter the ORBIT ME function.
Start: Press START, and slide the icon, push the aileron stick to the right or left. The H920 PLUS will y around
the pilot/ST16 with the distance between the start point and the pilot as the radius.
BACK: Tap BACK to return to the previous interface.
[
]: When the pilot tap the [ ], the icon will become[ ] and the ORBIT ME function will be paused. When tap-
ped again, the [ ] will become [ ], the copter will continue the ORBIT ME function. Exit the function by tapping
EXIT icon or switching ight mode.
NOTICE: You can increase/decrease radius by apply forward/back on right stick.
You also can trim the gimbal pan position by adjusting pan control knob on ST16 under Follow or Follow cont-
rollable mode in Pan direction..
NOTICE: The tilt direction of gimbal camera can be adjusted by the camera tilt control knob.
NOTICE: If the aircraft ies too close to the pilot, it will automatically enlarge the distance and then begin to
orbit.
NOTICE: Adjust the Throttle Control joystick to change the height of the aircraft, adjust the Aileron Control
joystick to change the orbit direction of the aircraft.
18
After sliding the icon, the remote control interface will display EXIT and [ ]. Tap the [ ]
the icon will become [ ]. Then the journey function will be paused. When tapped again, the
[ ] will become [ ], the H920 PLUS will continue the Journey function. Exit the function
by tapping EXIT icon or switching flight mode.
NOTICE:
When the Journey function is activated, the Journey distance may be set by the
pilot.
NOTICE:
The gimbal camera cannot be controlled when journey function is activated and
will remain the previous angle set before. Depending on the camera tilt, the H920 PLUSwill
fly up and out to take the perfect self-shot, or “selfie”.
NOTICE: The journey route is the reverse direction to which the gimbal camera is facing.
1/3
2
ORBIT ME: When Orbit Me is enabled, H920 Plus flies a circular path around the pilot.
Press ORBIT to enter the ORBIT ME function.
START:
Press START, and slide the icon, push the aileron stick to the right or left. The H920
PLUS will fly around the pilot/ST16 with the distance between the start point and the pilot as
the radius.
BACK: Tap BACK to return to the previous interface.
NOTICE: You can increase/decrease radius by apply forward/back on right stick.
You also can trim the gimbal pan position by adjusting pan control knob on ST16 under
Follow or Follow controllable mode in Pan direction..
NOTICE: The tilt direction of gimbal camera can be adjusted by the camera tilt control knob.
NOTICE:
If the aircraft ies too close to the pilot, it will automatically enlarge the distance and
then begin to orbit.
NOTICE: Adjust the Throttle Control joystick to change the height of the aircraft, adjust the
Aileron Control joystick to change the orbit direction of the aircraft.
[ ]: When the pilot tap the [ ] the icon will become [ ]and the ORBIT ME function will
be paused. When tapped again, the [ ] will become [ ], the copter will continue the ORBIT
ME function. Exit the function by tapping EXIT icon or switching flight mode.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yuneec Tornado H920 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yuneec Tornado H920 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 3,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Snelstart handleiding - Deutsch - 2 pagina's

Yuneec Tornado H920 Plus Gebruiksaanwijzing - Deutsch - 40 pagina's

Yuneec Tornado H920 Plus Snelstart handleiding - English - 2 pagina's

Yuneec Tornado H920 Plus Gebruiksaanwijzing - Français - 40 pagina's

Yuneec Tornado H920 Plus Snelstart handleiding - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info