697434
30
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
Installation
6720813171 (2016/05)30
Connection to the terminal strip of the boiler
Connect the external pump, if available, (not the pump of the pump
group) to the green PK terminal. The maximum allowed connected
load of the pump = 250 Watts.
Fig. 56 Terminal strip - external heating pump 230 V (connection
colour green)
Connecting the DHW pump
Connect the DHW pump to the grey PS terminal.
The maximum allowed connected load of the pump = 250 Watts.
Fig. 57 Terminal strip - DHW pump 230V (connection colour grey)
Connecting the DHW circulation pump
Connect the DHW circulation pump to the lilac PZ terminal. The
maximum allowed connected load of the pump = 250 Watts.
Fig. 58 Terminal strip - DHW pump 230 V (connection colour grey)
Connecting to the mains
A mains supply of 230 V - 50 Hz is required.
External controls are suitable for volt free installation.
Wiring to the boiler must be in accordance with the current I.E.E.
(BS 7671) Wiring Regulations and any local regulations.
Wiring should be a 3 core PVC insulated cable, not less than 0.75 mm²
(24 x 0.2 mm), and to table 16 of BS 6500.
Connection must be made in a way that allows complete isolation of the
electrical supply such as a double pole switch having 3 mm contact
separation in both poles, or by a three pin connector, serving only the
boiler and system controls. This boiler is equipped with a double pole
switch [1]. The means of isolation must be accessible to the user after
installation.
The electrical connection to the mains supply should be readily
accessible and adjacent to the boiler.
If the supply cord is damaged, it must be replaced by a registered Gas
Safe installer to avoid a hazard and must be an original spare part.
The electrical supply for both the boiler and the system must be taken
from the same fused spur outlet.
Fig. 59 Mains supply
8.5.6 Installing function modules (accessories)
The following function modules (accessories) can be connected to the
boiler:
Heat demand 0-10 V module EM10
Error reporting module EM10
Switch module WM10
Mixing module MM10
Solar module SM10.
Function modules (accessories) can be installed in 2 ways:
in the boiler (max. 2)
outside the boiler.
Both methods are described below.
Determine how the modules have to be installed.
Installing and connecting function modules (accessories) in the
boiler
Loosen the screw [1].
Pull open the draw [2].
Fig. 60 Opening the draw
All Worcester boilers require a permanent live.
DANGER: Danger of fatal accident due to electric shock.
Disconnect the boiler from the mains power supply
before working on the boiler.
PK
6 720 648 726-056.1TD
PS
6 720 648 726-057.1TD
PZ
6 720 648 726-058.1TD
Refer to the installation instructions of the relevant
function modules for information about installation and
combination possibilities.
ON
OFF
6 720 648 726-059.1TD
1
1
2
6 720 648 726-060.1TD
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch GB162-80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch GB162-80 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Worcester-Bosch GB162-80

Worcester-Bosch GB162-80 Installatiehandleiding - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info