697434
28
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
Installation
6720813171 (2016/05)28
Connecting the outdoor temperature sensor
If outdoor temperature-dependant control operation is used, an outdoor
temperature sensor must be connected.
Connect the outdoor temperature sensor to the blue FA terminal,
using a 2-core cable of 0.75 mm².
Fig. 47 Terminal strip - Outdoor-temperature sensor (connection
colour blue)
Connecting the potential-free heat demand
Connect the potential-free heat demand contact to the green WA
terminal ( fig. 48). The maximum allowed resistance of this circuit
is 100 Ω. Use a 2-core cable of 0.75 mm².
Fig. 48 Terminal strip - potential-free heat demand (connection colour
green)
Fig. 49 Terminal strip - WA potential-free heat demand
Connecting the DHW temperature sensor
Connect the DHW temperature sensor to the grey FW terminal, using
the harness enclosed with the DHW temperature sensor [1].
Fig. 50 Terminal strip - potential-free heat demand (connection colour
green)
Connecting an external switch contact
A potential-free external switch contact can be connected. This external
switch contact can be used to safeguard a underfloor heating system so
that the heating water temperature will not become too high etc.
When the external switch contact is opened, the boiler will be switched
off for heating operation and for domestic hot water operation.
The pump continues to run for the run-over time set on the boiler.
Remove the cable from the EV terminal.
Connect the external switch contact to the red EV terminal.
Fig. 51 Terminal strip - external switch contact, potential-free, e. g. for
floor heating (connection colour red)
Connecting external 230 V controls with use of the 230 Volt
converter (only for GB162-50/65)
The gas wall hung boiler condensing can be fitted with the following
external controls:
a room-temperature control device at 230 V connected to the room
control converter (only for GB162-50/65). For connection, see the
electrical wiring diagram supplied with the 230 Volt converter),
ON/OFF temperature controller, Volt free.
This connection is non polarity sensitive. This means that
it does not matter which order the wires are connected.
NOTICE:
It is not possible to connect a thermostat
simultaneously to the RC connection and to the
terminal for the potential-free heat demand (WA)
( fig. 49).
It is possible to operate the boiler with an On/Off
contact for potential-free heat demand, but the room
temperature-based modulating function of the boiler
cannot then be used anymore. This has a negative
effect on comfort and energy consumption. If an On/
Off contact for potential-free heat demand is
installed, the boiler will only modulate up to the
preset CH flow temperature.
This connection is reverse-proof. This means that it
does not matter which order the wires are
connected.
FA
6 720 648 726-047.1TD
WA
6 720 648 726-048.1TD
WA
6 720 648 726-048.1TD
NOTICE:
This connection is reverse-proof. This means that it
does not matter in which order the wires are
connected.
It is not possible to connect more than one DHW
temperature sensor in the boiler. It is only possible to
connect a DHW temperature sensor which is suitable
for this boiler.
This connection is reverse-proof. This means that it does
not matter in which order the wires are connected.
6 720 648 726-050.1TD
1
EV
6 720 648 726-051.1TD
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch GB162-80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch GB162-80 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Worcester-Bosch GB162-80

Worcester-Bosch GB162-80 Installatiehandleiding - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info