805571
7
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
7
Second step: control the circuits
For each circuit, you can link an element to drive the
pump/boiler of the circuit. This can be done for example by BT-
WR02 RF.
From the main screen, press then press . On the list
box, choose “Radio pairing”, then “Circuit”. Select the number of
the circuit, put the element to link (BT WR02 RF) in link mode,
then start process by pressing .
Do the same for the other circuit, if you have more.
Heat and Cool installations
If your installation can make cooling, then you can switch either
from Heat to Cool manually or automatically:
- If you have a BT HCM02 RF in your installation set as
“Master” (refer to Manual instruction of the device) then all
is automatic you don’t have to do anything
- For all other cases, you have to do the switch manually:
from main screen press then and go in “H&C”.
There you will have the choice netween “Heating Only”
“Cooling Only” or “Manual Reversible”. With this last
option, you create a shortcut in the main menu (icon 4)
where you can easily change Heat/Cool mode.
Notes:
- In Cooling Mode, Reduced mode and Antifreeze mode are
inactive: icon is displayed instead of or .
- In the thermostat, user can configure the parameter “Cold”
that allows the zone to do Cooling or not. If it is set to “No”,
then if the mode of the zone is Cooling then the zone
won’t make Cooling.
INSTALLATION TYPES
(HEATING/COOLING)
Type 1 :
In this configuration:
Pair first the thermostat (master) with the Central before
pairing the other devices.
The actuators regulate on thermostat temperature.
Type 2 :
In this configuration:
Pair first the thermostat (master) with the Central before
pairing the other devices.
The other devices regulate on thermostat temperature.
Warning! In this installation type, the BT (MASTER) must be in
regulation Air mode (not floor or Air + Floor)
Type 3 :
In this configuration :
BT-WR, BT-PR, BT-FR can be configured as a plug or
lighting devices.
Type 4 :
In this configuration:
Each UFH 1 is paired with the Central and the thermostats
are paired with UFH.
During the pairing, the Central create automatically rooms
according to the number of thermostats (rooms) of UFHs.
Default names are given to the rooms. You can modify them
in the menu “House creation” (you can identify these rooms
with different setting temperatures)
REMOTE CONTROL
You need to connect the central unit to WiFi: See WiFi setting
above.
Make sure that the central is connected to the WiFi network with
an IP address (See WiFi status above) otherwise you need to
connect the central unit to WiFi.
Connect to the web pages to drive your central unit:
http://smarthome.wattselectronics.com/
Or download WATTS® Vision™ application from App store or
Google Play on your Smart Phone.
Create an account.
Validate your email.
Request a pairing code to link your central unit to your account.
The pairing code (valid 24h) is sent to your mail box.
In the WiFi status menu of the central unit, enter the pairing
code.
Your central unit should appear after a few minutes in the
application or the web page. It may take up to a few hours to
display all rooms and devices in the application. You can then
drive your central unit from everywhere.
Watts is not responsible for the correct operation of the
connected devices, and potential damage caused by
malfunction or improper use of the connected devices and
appliances.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Watts BT-CT02 Central Unit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Watts BT-CT02 Central Unit in de taal/talen: Engels als bijlage per email.

De handleiding is 1.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Watts BT-CT02 Central Unit

Watts BT-CT02 Central Unit Gebruiksaanwijzing en installatiehandleiding - Nederlands - 240 pagina's

Watts BT-CT02 Central Unit Gebruiksaanwijzing en installatiehandleiding - Nederlands - 10 pagina's

Watts BT-CT02 Central Unit Gebruiksaanwijzing en installatiehandleiding - Deutsch, English, Français, Italiano, Espanõl, Dansk, Svenska, Norsk, Suomi - 240 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info