805571
6
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
6
LIGHTING DEVICES MANAGEMENT
Press on in the main screen and press on
1. Device type choice (heating/cooling, lighting, On/Off). These
buttons are only displayed if one device type is installed in the
room (colored if active).
2. Room changing.
3. Information about the lighting devices installed in the room.
4. Indicates both the current lighting device number / the
number of lighting devices in the room.
5. Indicates the lighting status. A press on it switches the
lighting status.
6. General management for all lighting in the room.
7. Current room.
8. Quick access to the desired room.
9. Only displayed if the number of devices is upper than 1; used
to select the devices in the room.
10. Only displayed if the screen is locked.
ON/OFF DEVICES MANAGEMENT
Press on in the main screen and on
1. Device type choice (heating/cooling, lighting, On/Off). These
buttons are only displayed if one device type is installed in the
room (colored if active).
2. Room changing.
3. Information about the device.
4. Indicates both the number of the current device / number of
devices in the room.
5. Indicates the ON/OFF status. A press on it switches the
status of the device.
6. General management for all the ON/OFF devices in the
room.
7. Current room.
8. Quick access to the desired room.
9. Only displayed if the number of devices is upper than 1; used
to select the devices in the room.
10. Long press to switch between auto mode and normal mode
(colored if active).
11. Displayed only if the device is in Auto mode, press to
access and edit the device program.
12. Only displayed if the screen is locked.
PAIRING
Create the room if it doesn’t exist
House creation
Radio pairing
- Choose the device type (heating/cooling)
- Choose the room
Note: The master must be the first paired device.
- Put the device in pairing mode (refer to device leaflet)
- Start the pairing on the Central
- Follow the instructions given by the Central (check on the
device that the pairing is successful, refer to the device
leaflet)
- n.b: Automatic pairing time in case of RF communication
loss: 10s.
- When you have finished to pair all devices and installed all
devices in their final location, you have to make sure that the
range allows good communication between devices. Please
modify the heating/cooling mode or the setpoint on the
central and make sure that the information is received by the
thermostat and the receiver.
Check the successful installation
-
- You will have warning in home menu for rf errors
communications. These errors should desappiers in 10
minutes maximum. If not, check devices who still in rf errors
put them in another place and repeat the procedure.
Hydraulic systems
If your installation has hydraulic elements, you may have to
drive pumps or boilers. With smartvision you can drive directly
up to 4 hydraulic circuits. And for each of those circuits, an RF
remote device can be linked. It works easily: if at least one
element of the circuit has a heating/cooling demand, the
element will drive the circuit and make the water flows.
First step: define on which circuit an element belongs to
With the plan of your installation, define which elements are on
“circuit 1”. Once it is done, on Smartvision, configure all
elements (heating/cooling device) that are on circuit 1.
To do this, in the main screen press , enter a zone that is
on circuit 1, then press and select one device of circuit 1
and press 5 seconds. Now you have entered the
configuration menu of the device.
Choose menu “HC”, now you have two option Electrical or
Hydraulic, select Hyraulic and then press on button . Now
you can select the circuit, that the device will act on.
Proceed like this for every heating/cooling device of this circuit.
Once all elements of circuit 1 are set, do the same for the other
hydraulic circuits.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Watts BT-CT02 Central Unit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Watts BT-CT02 Central Unit in de taal/talen: Engels als bijlage per email.

De handleiding is 1.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Watts BT-CT02 Central Unit

Watts BT-CT02 Central Unit Gebruiksaanwijzing en installatiehandleiding - Nederlands - 240 pagina's

Watts BT-CT02 Central Unit Gebruiksaanwijzing en installatiehandleiding - Nederlands - 10 pagina's

Watts BT-CT02 Central Unit Gebruiksaanwijzing en installatiehandleiding - Deutsch, English, Français, Italiano, Espanõl, Dansk, Svenska, Norsk, Suomi - 240 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info