Handleiding Visonic PowerMax Express (pagina 21 van 36) (Engels)

580333

Verklein

Vergroot

Pagina terug

1/36

Pagina verder

D-302989 21

GPRS Up / Down [Fig 4.5.3(23)]

My SIM Tel. # [Fig 4.5.3(23a)]

Here you enter the PowerMax SIM card telephone number.

The central station dials this number when it needs to connect

to the PowerMaxExpress for uploading / downloading data.

Caller ID# [Fig 4.5.3(23b)]

Here you determine the 1

IPMP receiver telephone

number. When the PowerMaxExpress responds to an

incoming call from the telephone number defined here, it

creates a connection to the IPMP for uploading /

downloading data.

Note: Caller ID#1 / ID#2 should be 6 or more digits for

wake-up by IPMP to work.

Caller ID# [Fig 4.5.3(23c)]

Here you determine the 2

IPMP receiver telephone

number. When the PowerMaxExpress responds to an

incoming call from the telephone number defined here, it

creates a connection to that IPMP for uploading /

downloading data.

Report Cnfrm Alarm

[Fig 4.5.3(24)] - see note in Fig. 4.5

Detail C

Here you determine whether the system will report

whenever 2 or more events (confirmed alarm) occur

during a specific period (see par. 4.4.33).

Available

options are: enable report, disable report,

enable + bypass (enabling report and bypassing the

detector - applicable to PowerMaxExpress that is

compatible with DD243 standard).

Report 24H Zones (Optional) [Fig 4.5.3(25)]

Here you determine whether 24 hour (silent and audible) zones

will function as normal 24 hour zones or as panic zones.

The options are: both original, audible as panic, silent

as panic, or both as panic.

Recent Close [Fig 4.5.3(26)]

Here you enable or disable the “recent closing” report, that is

sent to the central station if an alarm occurs within 2 minutes

from the expiry of the exit delay.

The options are: recent close ON and recent close OFF.

Zone restore [Fig 4.5.3(27)]

Here you determine whether a zone restore will be

reported or not.

The options are: report restore and don't report.

System Inactivity Report [Fig 4.5.3(28)]

Here you determine whether the central station will receive

a message if the system is inactive (not armed) during a

defined period (days).

The options are: disable, rep. after 7d, rep. after 14d,

rep. after 30d, rep. after 90d.

Call Waiting OFF (Optional) [Fig 4.5.3(29)]

Here you enter a code to cancel "call waiting" when calling

the central station.

4.5.4 Private Report (Fig. 4.5 Detail D)

Report To Private [Fig 4.5.4(1)]

Here you determine which event groups will be reported to

private telephone subscribers.

Term Description

all All messages

all (-op/cl) All messages, except open/close

all (-alerts) All messages, except alerts

alarms Alarm messages

alerts Alert messages

op/cl Open/close

disable report No message will be reported

Note: “All” means all events including the L. BAT and AC

FAIL trouble messages.

Note: All the above options can be reported to private

telephone subscribers by SMS. When Voice Report is

enabled alarms and alerts only can be reported.

The following siren signal will be sent to private telephone

upon event reporting:

FIRE: ON - ON - ON - pause.... (- - - - - - ......).

BURGLAR: ON continuously (

...)

EMERGENCY/LATCHKEY: 2-tone siren; like an

ambulance.

Voice report [Fig 4.5.4(2)]

Private Tel# [Fig 4.5.4(2a)]

Here you program the 1

telephone number (including area

code, if required) of the private subscriber to which the system

will report the event groups defined in Report To Private.

Private Tel# [Fig 4.5.4(2b)]

Here you program the 2

telephone number (including area

code, if required) of the private subscriber to which the system

will report the event groups defined in Report To Private.

Private Tel# [Fig 4.5.4(2c)]

Here you program the 3

telephone number (including area

code, if required) of the private subscriber to which the system

will report the event groups defined in Report To Private.

Private Tel# [Fig 4.5.4(2d)]

Here you program the 4

telephone number (including area

code, if required) of the private subscriber to which the system

will report the event groups defined in Report To Private.

Redial Attempts [Fig 4.5.4(2e)]

Here you determine the number of times the communicator

will dial the called party’s number (private telephone).

The options are: 1, 2, 3 and 4 attempts.

Attention! A maximum of 2 dialing attempts is permitted

by the Australian Telecommunication Authority.

Tel. acknowledge [Fig 4.5.4(2f)]

Here you determine whether the system will use the single

acknowledge or the all acknowledge mode when reporting to

private telephones.

Note: In the single acknowledge mode, receiving an

acknowledge signal from a single telephone is sufficient to

consider the current event closed and call off the

communication session. The remaining telephones serve for

backup purposes only. In the all acknowledge mode, an

acknowledge signal must be received from each telephone

before the current event is considered reported.

The options are: single ack and all ack.

SMS Report Tel# [Fig 4.5.4(3)]

SMS Tel# [Fig 4.5.4(3a)]

Here you define the first SMS phone number (including

area code, 16 digits maximum) to which pre-selected

event types (see par. 4.6.3) will be reported.

SMS Tel# [Fig 4.5.4(3b)]

Here you define the second SMS phone number (including

area code, 16 digits maximum) to which pre-selected

event types (see par. 4.6.3) will be reported.

SMS Tel# [Fig 4.5.4(3c)]

Here you define the third SMS phone number (including

area code, 16 digits maximum) to which pre-selected

event types (see par. 4.6.3) will be reported.

SMS Tel# [Fig 4.5.4(3d)]

Here you define the fourth SMS phone number (including

area code, 16 digits maximum) to which pre-selected

event types (see par. 4.6.3) will be reported.

Visonic PowerMax Express Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Visonic PowerMax Express

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info