Handleiding Visonic PowerMax Express (pagina 20 van 36) (Engels)

580333

Verklein

Vergroot

Pagina terug

1/36

Pagina verder

20 D-302989

Receiver 2 Account No. [Fig 4.5.3(7)] - see note in Fig.

4.5 Detail C

Here you enter the number that will identify your system to

the 2

central station. The account number consists of 6

hexadecimal digits.

PSTN/GSM RCVR1 [Fig 4.5.3(8)] - see note in Fig. 4.5

Detail C

Here you program telephone number of the 1

central station

(including area code, 16 digit max) to which the system will

report the event groups defined in Report Events.

PSTN/GSM RCVR2 [Fig 4.5.3(9)] - see note in Fig. 4.5

Detail C

Here you program telephone number of the 2

central station

(including area code, 16 digit max) to which the system will

report the event groups defined in Report Events.

IP RCVR 1 [Fig 4.5.3(10)]

Here you enter the IP address of the IP receiver that is

located in the 1

central station.

IP RCVR 2 [Fig 4.5.3(11)]

Here you enter the IP address of the IP receiver that is

located in the 2

central station.

SMS RCVR 1 [Fig 4.5.3(12)]

Here you enter the telephone number of the SMS receiver

that is located in the 1

central station.

SMS RCVR 2 [Fig 4.5.3(13)]

Here you enter the telephone number of the SMS receiver

that is located in the 2

central station.

PSTN Report Format [Fig 4.5.3(14)] - see note in Fig.

4.5 Detail C

Here you select the reporting format used by the control

panel to report events to central stations.

The options are:  SIA text  Contact-ID  SIA  4/2

1900/1400  4/2 1800/2300  Scancom (see Appendix B

- code lists).

4/2 Pulse Rate [Fig 4.5.3(15)] - see note in Fig. 4.5 Detail

Here you select the pulse rate at which data will be sent to

central stations if any one of the 4/2 formats has been

selected in PSTN Report Format.

The options are: 10, 20, 33 and 40 pps.

PSTN Report Retry [Fig 4.5.3(16)] - see note in Fig. 4.5

Detail C

Here you determine the number of times the communicator

will dial the central station’s number via PSTN.

The options are: 2, 4, 8, 12 and 16 attempts.

Note: To comply with UL requirements, the unit shall make

no less than five attempts and no more than ten attempts

to contact the central station.

GSM Report Retry [Fig 4.5.3(17)] - see note in Fig. 4.5

Detail C

Here you determine the number of times the communicator

will try to report via a cellular group (GPRS, GSM and

SMS) to the central station.

The options are: 2, 4, 8, 12 and 16 attempts.

Lan Report Retry [Fig 4.5.3(18)] - see note in Fig. 4.5

Detail C

Here you determine the number of times the communicator

will try to report via the Broadband Module communication

to the central station.

The options are: 2, 4, 8, 12 and 16 attempts.

Auto Test Time [Fig 4.5.3(19)]

Here you determine the time at which the telephone line will

be tested and reported to the central station.

Auto Test Cycle [Fig 4.5.3(20)]

Here you determine the time interval between consecutive

telephone line test messages sent to the central station.

The control panel performs this at regular intervals to verify

proper communications.

The options are: test every 5 hours, test every 1, 2, 5, 7, 14,

30 days and test OFF.

Line Fail Report [Fig 4.5.3(21)]

PSTN [Fig 4.5.3(21a)]

Here you determine if the PSTN telephone line

disconnection will be reported or not and determine the

delay between detection of line disconnection and the

failure reporting. If the telephone line is disconnected, the

event "tel line fail" will be stored in the event log.

The options are: don't report, immediately, 5 minutes,

30 minutes, 60 minutes or 180 minutes.

Note: To comply with EN requirements, "immediately"

must be selected.

GSM/GPRS [Fig 4.5.3(21b)]

Here you determine if the GSM/GPRS line disconnection

will be reported or not and determine the delay between

detection of line disconnection and report failure. If the

telephone line is disconnected, the event "GSM line fail"

will be stored in the event log.

The options are: don't report, 2 minutes, 5 minutes, 15

minutes, or 30 minutes.

Broadband [Fig 4.5.3(21c)]

Here you determine if the Broadband Module line

disconnection will be reported or not and determine the

delay between detection of line disconnection and report

failure. If the telephone line is disconnected, the event

"BBA line fail" will be stored in the event log.

The options are: don't report, 2 minutes, 5 minutes, 15

minutes, or 30 minutes

PSTN Up / Down [Fig 4.5.3(22)]

Remote Access [Fig 4.5.3(22a)]

Here you give or deny permission to access the system

and exercise control from a remote telephone.

The options are: rem. access ON and rem. access OFF.

Mast. Downl Code [Fig 4.5.3(22b)]

Here you determine the master installer 4-digit password for

downloading/uploading data into/from the PowerMaxExpress

memory.

Attention! If "0000" is used, it will not enable connection of

the PowerMaxExpress to the PC for upload/download

purpose.

Inst. Downl Code [Fig 4.5.3(22c)]

Here you determine the installer 4-digit password for

downloading data into the PowerMaxExpress memory.

Attention! If "0000" is used, it will not enable

connection of the PowerMaxExpress to the PC for

upload/download purpose.

Upload Option [Fig 4.5.3(22d)]

Here you determine whether the PowerMaxExpress data can

be uploaded into a computer while the system is in disarm

state or at any time (in HOME/AWAY arming & disarm state).

The options are: when system OFF and

any time

Up Download Tel# [Fig 4.5.3(22e)]

Here you enter the telephone number (up to 16 digits) of the

UL/DL server.

Note: Only for use with control panels monitored by

compatible central stations. Leave empty if not used.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Visonic PowerMax Express Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Visonic PowerMax Express

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info