809767

VTech VM919HD Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
> 3ft (1m)
NOTESNOTE
• The rechargeable battery in the parent unit
is built-in.
• Use only the power adaptors supplied with
this product.
• Make sure the parent unit and the baby unit
are not connected to the switch controlled
electric outlets.
• Connect the power adaptors in a vertical
or floor mount position only. The adaptors’
prongs are not designed to hold the weight
of the parent unit and the baby unit, so do not
connect them to any ceiling, under-the-table,
or cabinet outlets. Otherwise, the adaptors may
not properly connect to the outlets.
• Make sure the parent unit, the baby unit and
the power adaptor cords are out of reach of
children.
Specifications are subject to change without notice.
© 2022 VTech Communications, Inc. All rights reserved.
07/22. VM919HD_UK_QSG_V2.
VM919HD
Full Colour Pan and Tilt
HD Video Monitor
1 Connect the baby monitor
2
Power on or off the baby monitor
What’s in the box
4
Status check
Once you power on both your
baby unit and parent unit, your
parent unit displays images from
the baby unit, and the LINK LED
light turns on.
The baby unit green LED light
also turns on.
3 Positioning the baby monitor
Caution
• The default volume of your parent unit is
level 3, and the maximum volume is level
5. If you experience feedback from your
baby monitor while positioning:
- Make sure your baby unit and parent
unit are more than 1 meter apart, OR
- Lower the volume of your parent unit.
NOTESNOTE
Note
• To avoid interference from other electronic
devices, place your baby monitor at least 1 metre
away from devices such as wireless routers,
microwaves, mobile phones and computers.
Use the menu
Press MENU to enter the menu, choose a
menu item, or save a setting. You can use
the parent unit for advanced settings or
operations, such as to play or stop the baby
unit lullaby, or to adjust the baby unit sound
sensitivity.
While in the menu:
• Press , , or to scroll among the
menu options.
• Press SELECT to select an item, or to save
a setting.
• Press TALK to return to the live video.
• Press to go to the Help & info page.
Basic operation - Parent unit
Overview - Parent unit
Important safety instructions
1LINK LED light
2 LED light
33- level sound indicator
light
4TALK
• Press and hold to talk to
the baby unit.
• While in a submenu,
press to exit.
5
• Press to zoom in/out.
• When in the main menu,
press to go to the
Help & Info page.
6Arrow keys
7MENU/SELECT
• Press to enter the main
menu.
• While in a menu, press to
choose an item, or save a
setting.
8- VOL/ VOL +
• Increase or decrease
parent unit’s volume.
9Microphone
10 POWER key
11 Power jack
12 RESET
• Force reboot the parent
unit.
13 Antenna
14 Speaker
15 Stand
Parent unit icons
Quick start guide
x 2
x 2
Quick start guide
Charge the parent unit
battery before use
When you connect and turn
the parent unit on, the battery
will charge automatically.
Slide the switch to ON to power on
your baby unit.
After the parent unit is fully charged,
press POWER until the welcome
screen appears.
1
Connect the baby monitor (Cont’d)
< 3m
> 3m
≥
< 3ft (1m)
3ft (1m)
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
Adjust speaker volume
Pressing -VOL / VOL+ adjusts the parent
unit speaker volume level received from
the baby unit.
Muted
Zoom
Press to zoom in or out.
Talk to your baby via the baby unit
1. Press and hold the TALK key.
2. When the icon displays on screen,
speak to your parent unit. Your voice is
transmitted to the baby unit.
3. When finished talking, release
the TALK key to hear your baby again.
Press and hold
Turn on/off the parent unit screen
You can turn on or turn off the parent
unit screen without powering off the
parent unit. You can still hear sound from
the baby unit.
• Press POWER on the parent unit to
turn off the screen.
• Press any keys on the parent unit to
turn on the screen again.
2
1
3
4
5
6
7
8
9
13
14
15
12
11
10
The applied nameplate is located at the bottom of the baby
unit’s base.
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above
2 metres.
4. This product is not a substitute for adult supervision of the
infant. Supervising the infant is the responsibility of the
parent or carer. This product could cease operating, and
therefore you should not assume it will continue working
properly for any given period of time. Further, this is not a
medical device and should not be used as such. This product
is intended to assist you in supervising your baby.
5. Do not use this product near water, for example, near to a
bath, sink, swimming pool or shower.
6. CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely
high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas. Dispose of
used battery according to the instructions.
7. Use only the power adaptors included with this product.
Incorrect power adaptor polarity or voltage can seriously
damage the product.
Power adaptor information:
Parent unit output: 5V DC 2A
VTech Telecommunications Ltd.
Model: VT05EEU05200 (EU), VT05EUK05200 (UK).
Baby unit output: 5V DC 1A.
VTech Telecommunications Ltd.
Model: VT05EEU05100 (EU), VT05EUK05100 (UK).
Rechargeable battery information:
3.7V 5000mAh, 18.5Wh Lithium-ion battery
Zhuhai Great Power Energy Co., Ltd.
Model: GSP806090-5Ah-3.7V-1S1P
8. The power adaptors are intended to be correctly
oriented in a vertical or floor mount position. The prongs
are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
9. For pluggable equipment, the socket-outlet should
be installed near the equipment and should be easily
accessible.
10. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
11. Do not cut off the power adaptors to replace them with
other plugs, as this causes a hazardous situation.
12. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
13. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or local power company.
14. Do not overload wall outlets or use an extension cord.
15. Do not place this product on an unstable table, shelf, stand
or other unstable surfaces.
16. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product on
a soft surface such as a bed, sofa or rug.
This product should never be placed near or over a
radiator or heat source.
17. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any
kind on the product.
18. To reduce the risk of electric shock, do not disassemble
this product, but take it to an authorized service facility.
Opening or removing parts of the product other than
specified access doors may expose you to dangerous
voltages or other risks. Incorrect reassembling can
cause electric shock when the product is subsequently
used.
19. You should test the sound reception every time you turn
on the units or move one of the components.
20. Periodically examine all components for damage.
21. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset
the baby monitor periodically by powering off and then
powering on the units, and power off the baby monitor
if you will not use it for some time.
22. Children should be supervised to ensure that they do not
play with the product.
23. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 0oC
and 40oC.
2. Do not expose the product to extreme cold, heat or
direct sunlight. Do not put the product close to a heating
source.
3. Batteries should not be exposed to excessive heat such as
bright sunshine or fire.
4. Warning—Strangulation Hazard—
Children have STRANGLED in cords. Keep
this cord out of the reach of children (more
than 0.9m away. Do not remove this tag.
5. Never place the baby unit(s) inside the
baby’s crib or playpen. Never cover the baby unit(s) or
parent unit with anything such as a towel or a blanket.
6. Other electronic products may cause interference
with your baby monitor. Try installing your baby
monitor as far away from these electronic devices
as possible: wireless routers, radios, cellular
telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless
telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and
implanted cardiac pacemakers. Supported by the U.S. Food
and Drug Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the
pacemaker.
• Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding
electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product
is safe to be used based on scientific evidence available today.
Main menu
Melodies and soothing sounds
Melodies and Soothing Sounds
• Select play all melodies, or play one of the
five melodies and four soothing sounds.
Timer
• You can also set the timer to stop playing
after 15, 30 or 60 minutes, or playing non-
stop.
Alerts - Sound, motion and temperature
Sound
• Select sound Sensitivity level.
• Turn on/off Sound Detection Alert.
• Turn on/off Auto Wake Up function.
(See Sound Detection and Auto Wake Up
section)
Motion
• Turn on/off Motion Alert.
• Select motion Sensitivity level.
(See Motion Detection section)
Main menu
Temperature
• Turn on/off Temperature Alert.
Set the parent unit to beep whenever the
room temperature detected by the baby
unit falls outside of the set temperature
range.
• Select Minimum temperature for alert
range.
• Select Maximum temperature for alert
range.
• Select temperature Format.
Set temperature display in Fahrenheit (oF)
or Celsius (oC ).
Parent unit settings
• Adjust parent unit screen Brightness.
• Turn on/off Dim Mode.
Baby unit settings
• Turn on/off baby unit’s Status LED.
• Select Field of View.
Choose Wide angle or Standard .
• Adjust baby unit’s speaker Volume.
General settings
• Turn on/off Low Battery Alert Tone.
Set the parent unit to beep when the
battery is low.
• Turn on/off No Link Alert Tone.
Set the parent unit to beep when the link
between the parent unit and the baby unit
is lost.
• Add baby unit.
• Remove baby unit.
Main menu icons
Current view status.
Night vision feature is activated automatically.
Motion alert is turned on.
Sound detection alert is turned on.
Melodies or soothing sound are turned on.
Parent unit speaker is muted.
Temperature alert is turned on.
Real-time temperature indicator
Battery status indicator
Status icons
Alert icons
• Displays when parent unit battery is low and
needs charging.
• Displays when motion is detected at a baby
unit.
• Displays when sound is detected at a baby
unit.
• Baby unit detection temperature exceeds
the set maximum.
• Baby unit detection temperature is lower
than the set minimum.
Overview - Baby unit
1Microphone
2Camera lens
3Light sensor
4LED indicator
5Infrared LEDs
6 ON/OFF switch
7Antenna
8Speaker
9Temperature sensor
• Position the sensor
horizontally for optimal
usage.
Caution
• Do not bend the temperature
sensor upward.
10 Power jack
11 Threaded socket for wall
mounting
12 Pair button
1
6
12
11
10
2
3
5
7
8
9
4
1
6
12
11
10
2
3
5
7
8
9
4
1
6
12
11
10
2
3
5
7
8
9
4
NOTESNOTE
Notes
• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours.
When the parent unit battery is fully charged, the battery icon becomes solid .
• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging
time, turn the parent unit off while charging.
• The standby time varies depending on the sensitivity level you set, your actual use and the age of
the battery.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
The screen displays .
The light flashes.
The battery has very little
charge and may be used for
only a short time.
Charge
without interruption
(about
30 minutes).
The battery icon becomes
solid .
The battery is fully charged. To keep the battery charged, connect
it to AC power when not in use.
Connect the baby unit
Raise the parent unit antenna
for better reception
> 1 metre
< 1 metre
> 1 metre
> 1 metre
< 1 metre
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech VM919HD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech VM919HD in de taal/talen: Engels als bijlage per email.

De handleiding is 6.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van VTech VM919HD

VTech VM919HD Gebruiksaanwijzing - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info