19
RQT6252
Preset the stations one at a time.
11
Tune to the station.
22
Press [MEMORY].
33
Press [TUNING, 2, 1, PTY SELECTOR] to
select a channel.
44
Press [MEMORY].
11
Tune to “FM 87.50 MHz”.
22
Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30.
33
Tune to “AM 522 kHz”.
44
Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to 30.
(FM stations are replaced if any were preset in these channels.)
During automatic presetting, the memory indicator (˜) flashes and
the frequency scrolls. The memory indicator and channel numbers
are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting finishes.
For your reference
Even if the mains lead is disconnected from the household mains
socket, the stations remain in memory for approximately one month.
11
Press [PRESET, PTY SEARCH].
The channel number flashes for about 5 seconds.
22
Press [TUNING, 2, 1, PTY SELECTOR].
Hold down the buttons to change channels faster.
On the remote control
Press [CHANNEL 1 or 2 ].
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [≥10/-/--], then the two digits.
e.g. To select channel 21: [≥10/-/--] / [2] / [1]
The radio
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
Automatic presetting
Manual presetting
Selecting channels
Manual tuning
Direct tuning
You can tune radio stations manually by selecting the station’s
frequency.
11
Turn [INPUT SELECTOR] to select “TUNER”.
22
Press [-BAND, –FM MODE, DISPLAY MODE] to
select “FM” or “AM”.
33
Press [TUNING, 2, 1, PTY SELECTOR] to
select the frequency.
For your reference
Some equipment can interfere with radio reception. Turn off nearby
TV, VCR, DVD players, and satellite receivers or move them further
away from the antennas if this occurs.
qq
Press [TUNER/BAND RECEIVER].
The band changes each time you press the button.
ww
Press [DIRECT TUNING/DISC].
ee
Press the numbered buttons to enter the
frequency.
e.g. To select 107.90 MHz, press [1] / [0] / [7] / [9] / [0]
¡If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
¡If the frequency has not been input correctly, “ERROR” will be
displayed.
