480572
12
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
9
PART 2 • English
English
5.3.2 FIRST TIME INSTALLATION
In this menu you have the possibility to do First Time Installation, which clears all stored channels in the channel list
and all settings in your setup. Then a warning message will be displayed. There select YES if you want to delete or NO to
cancel. After confirming OK to reset receiver, First Time Installation Menu will be displayed. With BACK you can always
cancel actions and exit the actual menu or submenu.
5.3.3 AUTOMATIC SEARCH
This menu allows you to do an auto search at selected satellite. Use the pq for navigation and tu buttons to
change settings.
Satellite Name: Use the
u and pq buttons to select desired satellite and OK to confirm selection.
Search For: Use the
tu buttons to select between TV and Radio, TV Only, Radio Only. The search
process will be made according to the selected channel type.
Scrambled channels: Use the
tu to choose Yes or No. If you select Yes, the scrambled channels will be
included. If you select No, they won’t be searched for. After setting the mode according
your wishes, press OK to start the automatic search process. After finishing the automatic
search, the program list will be updated. If new programs are found, they will be added at
the end of the program list.
5.3.4 MANUAL SEARCH
This menu allows you to manually search for specific channels. With BACK you can always cancel actions and exit the
actual menu or submenu.
Satellite Name: Use the
u and pq buttons to select desired satellite and OK to confirm selection.
Polarization: Use the
tu buttons to select between Horizontal and Vertical.
Frequency: Enter new/changed values with the NUMERIC buttons.
Symbol rate: Enter new/changed values with the NUMERIC buttons.
Modulation Settings: Use
u and pq buttons to change settings from this transponder for
Standard: DVBS, DVBS2 or Auto
Mode: 8PSK, QPSK or Auto (in DVBS not to change)
FEC Rate: from 1/2/ to 9/10 and Auto (according above settings)
Network Search: If this item is set to NO, the receiver will search for the channels available from preset
transponder list of the selected satellite. If this item is set to YES, the receiver will search
additionally for channels from NIT table (NIT= Network Identification Table). Use this
option to get new channels from transponders that appeared on satellite.
PID Entry (for single channel search):
Use
u and pq buttons to select and insert specific data from a single channel as following:
Video PID: Enter new/changed values with the NUMERIC buttons.
Codec: Use
tu to select between MPEG2 and H264.
Audio PID: Enter new/changed values with the NUMERIC buttons.
Format: Use
tu to select between MPEG and AC3.
PCR PID: Enter new/changed values with the NUMERIC buttons.
Search For: Use
tu to select between TV and Radio, TV Only, Radio Only. The search process will be
done according the selected channel type.
Scrambled channels: Use
tu to choose Yes or No. If you select Yes, the scrambled channels will be included.
If you select No, they won’t be searched for. After you have set the mode according your
wishes, press OK to start the manual search process.
5.3.5 LOAD SETTINGS
Here you can reset receiver to load the preset channel table respectively the factory default settings. To perform the
factory default, highlight this item and press OK. Then a warning message will be displayed. Select YES, if you want to
set factory default, select NO to cancel. After confirming with OK, the database and receiver will be reset. With BACK
you can always cancel actions and exit the actual menu or submenu.
5.3.6 SAVE SETTINGS
Use this setting to setup your defined channel and transponder database and other settings as factory default setting.
To save your current settings as factory default, highlight this item and press OK. Then a warning message will be
displayed. Select YES, if you want to perform this action or select NO to cancel. After confirming with OK the database
will be written to the receiver memory. With BACK you can always cancel actions and exit the actual menu or submenu.
WARNING It is recommended to perform first the “Save Settings” function (after you have done all setups and
necessary settings after First Time Installation) before you set receiver to “Load Default” (factory
default), because then you will be able to restore your settings easily in case of any malfunction or
wrong setup.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7500 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info