480572
13
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
10
PART 2 • English
5.4 Configuration
In this menu you can set up your personal preferences for below adjustments. Use the pq for navigation and tu
buttons to change settings. For entering values use the NUMERIC buttons. With BACK you can always cancel actions
and exit the actual menu or submenu.
Menu Language: Use the
tu buttons to select your language (English, German, Turkish, Czech, Slovak)
TV Settings: Press OK to enter submenu for adjusting the TV Type (4:3 or 16:9) and Screen Format
(4:3 = LetterBox / Pan&Scan, 16:9 = PillarBox / Full)
HDMI Output: Use the
tu buttons to select a setting according your desired settings/TV setup.
Date Time Settings: Press OK to enter submenu to adjust the Time Update (Automatic or Manual), Offset
(manual mode: +12h to -12h), Time (automatic: actual time will be shown; manual mode:
enter your time) and the Date (in manual mode: enter your actual date).
If you have chosen the automatic time update, receiver will collect time from your preset installed satellite (Austria and
Germany from Astra 19.2, Czech and Slovakian Republic from Astra 23.5).
Parental Settings: For accessing the parental setting submenu you will have to enter your PIN. Press OK
to enter submenu to adjust the Lock Mode (Disabled, Main Menu or Installation), Front
Panel Lock (Disabled or Enabled), Change Password (by pressing OK a screen will be
displayed asking you to enter new PIN and to confirm it. The default PIN code is 0000. )
Software Upgrade: Select this option in order to update your receiver with the latest software version. Software
update services are available from Astra at 19.2E. Press OK to enter submenu to Start Upgrade.
By pressing OK again receiver will search for correct update parameters belonging to its
specific update process. Follow further instructions displayed on screen. During the software
upgrade procedure, you can cancel it any time by pressing the BACK button.
WARNING Do not switch power off and do not disconnect the receiver from the dish during update process.
Front Panel: Press OK to enter submenu for adjusting the Scroll Status (Disabled or Enabled). In
Enabled mode you can adjust the Scroll Speed between Slow, Medium and Fast.
Note Below the TV picture you can see information regarding website, SW built date, serial number, loader
and software version, which might be asked from customer helpline or service support in case you
need any help or support.
5.5 Timers
You can set the timer to make the receiver perform designated actions including timer based wake-up or sleep
instructions to the receiver. Use
pq for navigation and press OK to enter desired timer setup. Afterwards use the tu
buttons to change settings and NUMERIC buttons to enter the desired values. With BACK you can always cancel actions
and exit the actual menu or submenu.
Name: Here you can select the desired channel from your channel list.
Time: Enter desired start time.
Date: Enter desired start date.
Duration: Enter the desired duration in minutes.
After all fields contain your desired entries, go to Mode for setting this timer to Active mode. Then press OK to save all
settings. When the timer has reached its start time, the receiver will switch to the desired program. When the end time
is reached, the receiver goes to stand-by mode.
Mode: Use this option to activate or deactivate the timer settings.
Note To avoid any problem in Timers menu, please check your date and time settings in Configuration
menu. Recommended option is to set Time Update to Automatic to ensure that your date and time
settings are correct.
5.6 Games
This menu contains following games: Bomb, Worm III, Tetris, Connect4 and Sokoban. Use the pq buttons to select
the desired game and press OK to enter. Then choose the level of difficulty and press OK to enter the game. To exit from
a game, press BACK.
BOMB: Use
pq and tu to move the square. Try to find all mines in the field.
WORM: Use
pq and tu to move.
TETRIS: Use
tu to move the blocks left or right. To drop them fast, use q. To rotate the blocks,
use
p. Press OK to pause the game.
CONNECT 4: Use
pq and tu to select the player and the board size. Then use tu to select
position and press OK where you want to drop the ball. If you press the BLUE button, you
can pause the game.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7500 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info