720561
13
Verklein
Vergroot
Pagina terug
1/146
Pagina verder
11
ENGLISH
2. Insert battery pack into the charger as described in the
charger section of thismanual.
Fuel Gauge Battery Packs (Fig.F)
Some STANLEYFATMAX battery packs include a fuel gauge
which consists of three green LED lights that indicate the level of
charge remaining in the batterypack.
To actuate the fuel gauge, press and hold the fuel gauge
button
25
. A combination of the three green LED lights will
illuminate designating the level of charge left. When the level of
charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to berecharged.
NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-userapplication.
Attaching Guard (Fig.B, C)
WARNING: Never remove the guard. Damage
or personal injury couldresult.
WARNING: NEVER OPERATE APPLIANCE
WITHOUT GUARD FIRMLY IN PLACE. The guard must
always be properly attached on the appliance to protect
theuser.
1. Remove the guard screws
16
.
2. Slide the guard
11
fully onto the trimmer head
8
.
Make sure the tabs on the guard engage the ribs on the
trimmerhead.
3. Continue to slide the guard on until it snaps”into place. The
locking tab should snap into the housingslot.
4. Using a crosshead screwdriver, insert the guard screw and
tightensecurely.
5. Once the guard is installed, remove the covering from the
line cut-off blade, located on the edge of theguard.
Attaching the Auxiliary Handle (Fig.D)
For some models the auxiliary handle may need to be attached.
If the model needs the auxiliary handle attached, please refer to
theseinstructions.
1. To attach the auxiliary handle
5
, press in on the auxiliary
handle adjustment buttons
15
on both sides of the upper
housing as shown in Figure D.
2. Position the auxiliary handle as shown in Figure D . Partially
push the auxiliary handle on so it will hold the buttons in
when you release them with your hand.
3. Push the auxiliary handle completely onto the housing and
position it slightly until it snaps” intoplace.
NOTE: To adjust the auxiliary handle up or down, press in on the
buttons and raise or lower the handle.
NOTE: The handle should be adjusted so that your front arm is
straight when the trimmer is in the workingposition.
Height Adjustment (Fig.E)
CAUTION: Adjust the length of the trimmer to
obtain proper workingpositions.
1. The overall height of the trimmer can be adjusted by
loosening the height-adjust collar
6
by rotating it in the
direction of the arrow shown in Figure E.
2. Move the upper housing straight up or down. When the
desired height is achieved, tighten the collar by rotating it
opposite of the direction shown in FigureE.
Releasing the Cutting Line (Fig.A)
In transit, the cutting line is taped to the spool housing
10
.
Remove the tape holding the cutting line to the
spoolhousing.
OPERATION
Instructions for Use
WARNING: Always observe the safety
instructions and applicableregulations.
WARNING: To reduce the risk of serious
personal injury, turn tool off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
Proper Hand Position (Fig.A, I)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
asshown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation of a
suddenreaction.
Hold the handle
4
with one hand. as shown in figure I
Switching Trimmer On and Off (Fig.A)
WARNING: Never attempt to lock the trigger
in the onposition.
To turn the appliance on, squeeze the lock-off button
2
and
then the On/Off trigger
1
. Once the unit is running, you may
release the lock off button. To turn the appliance off, release the
On/Offtrigger.
Speed Control Switch (Fig.A)
This string trimmer gives you the choice to operate at a
more efficient speed to extend the runtime for larger jobs, or
accelerate the trimmer speed for high-performancecutting.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley SFMCST933 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley SFMCST933 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 14,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info