812374
40
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
Charge time
When solar charging begins, the connected booster pump fills the system for the time set here.
Parallel operation R1/R2
The relay is switched on at the same time as the set relay R1 or R2.
Parallel operation
Here you can additionally set the switch mode.
On : The function switches parallel to the set signal output.
Inverted : The function switches contrary to the set signal output.
Delay
In this menu, it is set how long to wait after switching the signal output until the parallel operated relay switches as well.
Follow-up time
In this menu, it is set how long the parallel-operated relay continues to operate after the set signal output has been deactivated.
Always on
Relay is permanently switched on.
Heating circuit
A heating circuit pump with fixed hysteresis (+/- 1 °) controlled to achieve the target value. A delay of 30 seconds of activation/ deactivation is
fixed to prevent shocks. The RC21 room controller can be used as room sensor.
Room sensor
Select the reference sensor for the room temperature.
Room Reference (Night)
Set room temperature for the night-time mode If the temperature is exceeded at the room sensor outside the set times, the relay will turn off.
Room Reference (Day)
Set room temperature for the daytime mode If the temperature is exceeded at the room sensor at the set times, the relay will turn off.
Release Times
Thermostat activity times
Set the desired periods of time when the thermostat should be active. For each weekday, three times can be specified, furthermore, you can
copy individual day to other days. Outside the set times the thermostat is switched off.
Heat quantity
Constant flow
If “Constant flow” is activated as the type of heat quantity metering, the approximate heat from the manually entered values for antifreeze, its
concentration and the flow from the system and the measured sensor values from the collector and storage are calculated. Additional inform-
ation about antifreeze, its concentration and the flow of the system is required. Additionally through the setting offset ∆T, a correction factor
can be set for the heat quantity collection. Since the collector temperature and the storage temperature can be used for the heat quantity
metering, depending on the system, there may be deviations from the displayed collected temperature to the actual previous temperature or
the displayed storage temperature to the actual return temperature. Through the setting Offset ∆T, this deviation can be corrected.
Example: displayed collector temperature 40°C, read previous temperature 39°C, displayed storage temperature 30°C, read return tem-
perature 31° means a setting of -20% (displayed ∆T 10K, actual ∆T 8K => -20% correction value)
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sorel LTDC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sorel LTDC in de taal/talen: Engels als bijlage per email.

De handleiding is 5.41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sorel LTDC

Sorel LTDC Gebruiksaanwijzing - Nederlands - 36 pagina's

Sorel LTDC Gebruiksaanwijzing - Deutsch - 50 pagina's

Sorel LTDC Gebruiksaanwijzing - Français - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info