619690
9
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
8
Installation S3
Once you have performed a download it is time to install the Snooper S3
into your vehicle. The most important aspects of this installation are
ensuring that the Snooper S3 is positioned in such a way that it has a
clear view of the sky whilst ensuring that the device is situated so that it
does not interfere with the vehicles controls and does not jeopardise
either the passengers or drivers safety.
For best results mount the S3 on to the vehicles dashboard so that the
top of the unit has a clear view of the sky. Some vehicles including
Renault’s, Citroens and Peugeot’s may come with a ’Heat reflective’ or
’Comfort’ front windscreen which may effect the performance of the
built-in GPS antenna, although the S3 will work effectively in vehicles with
a ’heated’ windscreen. In these situations you will need to purchase a
re-radiating antenna which can be positioned on the rear parcel shelf.
Contact Performance Products or your local dealer for further information.
In both cases the unit or extension antenna should be positioned so that
it has a clear view of the sky directly above. When positioning your
Snooper S3 ensure that it is located in such a way that you can easily
view the LED display without having to take your eyes from the road
ahead and so that you can reach the controls safely. Please also be
aware that you will need to be able to remove the device to perform
downloads. Once you have found a suitable location for your S3 secure it
in place with the ’Hook and loop’ fastener or suction cup bracket
provided, remembering to clean the area where the fastener or bracket is
going to be positioned thoroughly before hand to ensure a good contact.
More in depth mounting instructions are provided below.
PLEASE NOTE: Be careful to choose a location that does not block the
drivers view or where it might endanger the driver or passengers should
your vehicle suddenly come to a stop or be involved in an accident.
RS232
RD
Windscreen
Dashboard
19
Radar Alerts (Only applicable where S100 RLD is connected)
If you have the S100-RLD connected to your S3 you will be able to
receive radar alerts. The information provided is more basic than when
you receive an alert via GPS but still effective. When the device first
receives a radar alert the unit will begin to ’Beep’ slowly at first but
quicken as you get closer to the source. At the same time the LED
display will indicate that you are detecting radar by illuminating the letter
’R’ on the display. Next the red LED’s will illuminate starting with a single
LED and building up to 4 red LED’s as you get closer to the source of the
radar.
Laser Alerts
The S3 incorporates a built-in laser detector. As laser often requires
instant action the device simply gives you a loud audible alert whilst the
display will flash ’L’ and all 4 red LED’s simultaneously. No signal strength
will be indicated.
If you would like to Mute either a Radar or Laser alert, simply press the
’Mute’ button at any time during the alarm.
CANCEL
NEW LOCATION
MUTE
CANCEL
NEW LOCATION
MUTE
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snooper S3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snooper S3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info