619690
8
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
7
Downloading
Your Snooper S3 neo comes ’unpopulated’ so before use, you will need
to download all the location co-ordinates on our database by connecting
the device to your PC.
Performing a download is simple but first of all you will have to install the
downloading software on to your PC by using the CD Rom included with
this product. Simply put the CD into an available CD drive and follow the
on screen instructions.
Once the the S3 download software has been installed, double click on
the S3 download software icon that should now have appeared on your
desk top and follow the on-screen instructions carefully. Connect the
RS232 cable to a spare comport on your computer, connecting the
opposite end of the lead to the socket marked RS232 on your S3. Next
plug the 240V power supply into a standard UK wall socket and plug the
opposite end of this lead into the socket on the back of the unit marked
DC 12V. Note: Do not use any other 240V power supply than the one
provided. Using a different power supply may damage your unit and
will invalidate the warranty. Next switch your S3 on by turning the on/off
volume control towards you. Follow the on-screen instructions until you
reach the screen featuring the ’Start Update’ button. You have the
opportunity here to select between downloading the Camera only
database or the Camera and Schools database, by clicking on the
’Download File’ drop down and highlighting the file you would like. Finally
once you have made your selection press ’Start Update’ and the
download will run automatically whilst the on-screen display will keep you
informed of it’s progress.
As there are constant additions to our location database you will need to
perform regular downloads. The frequency with which you do this is
entirely up to you, but we recommend that higher mileage drivers often
driving on unfamiliar roads, download once or twice a week whereas
lower mileage drivers perform a download once or twice a month.
Once the download has been completed your S3 is ready for use.
Please note that you will need to register your Snooper S3 before
you can perform any downloads.
20
Features and Settings
1. Pre-Alert Setting
The PreAlert setting allows you to adjust the distance that your S3 will
detect from when utilising GPS. To enter the ’PreAlert’ setting from the
Standby screen press the MUTE button for approximately 2 seconds.
The display will show the letter ’D’ and then indicate the pre-alert distance
currently selected. Next using either the MUTE button or the CANCEL
button scroll up or down until your desired pre-alert distance is displayed
and press SELECT. You can set your S3 to alert from 100-500m.
If you do not press any buttons for a period of 5 seconds you will
automatically exit the pre-alert setting and return to the standby display
without adjusting the distance.
2. Setting Brightness
You can adjust the brightness of the display on your S3 by pressing the
cancel button when the unit is not detecting or locating a signal. There
are 2 levels of brightness to choose from bright or dimmed.
3. Adjusting the volume
The S3 has an adjustable volume for controlling the loudness of the
audible alert. To increase the volume simply turn the volume control on
the right hand side of the device, towards you. To decrease the volume of
the alert turn the volume control away from you.
CANCEL
NEW LOCATION
MUTE
Number indicates distance i.e. 2 = 200m
POWER ON/OFF
OFF
2
EAR
Volume Control
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snooper S3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snooper S3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info