619690
13
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
12
Caution: If you must use pliers to loosen the ring, be careful not to crush
the tip. Never use pliers or other tools to retighten the ring on the
cigarette lighter plug.
2. Pull the ring straight out, then remove the metal tip, spring and old
fuse.
3. Check the fuse to see if it has blown. If it has, replace it.
4. Replace the metal tip and spring inside the ring, then place the fuse
inside the cigarette lighter plug and screw the ring back onto the
plug. Make sure the metal tip is visible when you reassemble the
cigarette lighter plug.
Direct connecting/hard wiring your S3 neo.
You can power your Snooper S3 by wiring it directly to your vehicles 12v
electrical system using the ’Hard Wire’ cable supplied as standard with
your unit. Firstly connect the positive side of the cable (Red) to a 12v
switched live. This is a live that is On when the ignition is On and Off
when the ignition is Off. The negative side of the lead should be
connected to a negative ground, so can be attached to any metal portion
of the vehicles frame. Next plug the small adaptor on the other end of the
lead into the DC 12V input socket on the back of the unit.
Important: If you are unfamiliar with this procedure, please consult a
professional auto electrician
15
3. S100-RLD External Installation
As the S100-RLD is waterproof it can be mounted outside the vehicle
with the ’L’ shaped bracket, water resistant double sided tape and screw
pack provided.
- Find a suitable mounting position for the detector, ensuring that the
front of the unit has a clear view of the road ahead and is unobstructed
by any metallic objects and that there is a sufficient mounting area to
attach the ’L’ shaped fixing bracket. The S100-RLD needs to be
mounted in as horizontal a position as possible so that it is looking
directly down the road ahead but can be mounted either flat or on it’s
side if necessary. We recommend that you mount the detector either
behind the vehicles grille (If the openings of the grille are at least 10mm
in diameter) or within an air intake at the front of the vehicle. The S100-
RLD can be mounted anywhere at the front of the vehicle, but for
optimum performance we suggest you mount it as close to the
number plate of the vehicle as possible.
- When you have found a suitable location, using the ’L’ shaped mounting
bracket as a template, drill between 2 and 4 pilot holes into the selected
mounting surface for attaching the bracket using either the self-tapping
screws or the nuts and bolts provided.
You will need to attach the bracket using
at least 2 screws or 2 nuts and bolts to
ensure that the bracket is well secured.
Remember that there is a lot of
vibration within the engine bay
so it is very important that the
S100-RLD mounting bracket
is secured correctly.
Typical Fitting
10mm
Minimum
Typical Fitting
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snooper S3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snooper S3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info