26400
87
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
MODEL
AR-M160
AR-M205
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
BEFORE USING
THE MACHINE
COPY FUNCTIONS
CONVENIENT COPY
FUNCTIONS
PRINTER/SCANNER
FUNCTIONS
USER SETTINGS
TROUBLESHOOTING
ROUTINE MAINTENANCE
PERIPHERAL DEVICES
AND SUPPLIES
APPENDIX
8
18
32
38
42
52
71
74
77
Page
AR-M160
AR-M205
➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
FOR YOUR RECORDS ...
To protect against loss or theft, record and retain for reference the
copier’s serial number located on the back of the unit.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Authorized Sharp Copier
Service Department Number
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
This operation manual is also used for the AR-M160 J / AR-M205 J.
1
CONTENTS
CAUTIONS................................................................................................................................................. 3
CAUTIONS ON USING..................................................................................................................................... 3
IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE ........................................................... 3
CAUTIONS ON HANDLING ............................................................................................................................. 4
ENVIRONMENTAL INFORMATION................................................................................................................. 5
USING THE MANUAL ............................................................................................................................... 5
ABOUT THE OPERATION MANUALS............................................................................................................. 5
THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE INDICATIONS ....................................................... 5
CONVENTIONS USED IN THIS MANUAL....................................................................................................... 6
SPF AND RSPF................................................................................................................................................ 6
DIFFERENCES BETWEEN MODELS.............................................................................................................. 6
MAIN FEATURES ...................................................................................................................................... 7
1
BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS ..................... 8
OPERATION PANEL ......................................10
POWER ON AND OFF..................................... 12
POWER ON ....................................................12
POWER OFF ..................................................12
LOADING PAPER............................................ 13
PAPER............................................................13
LOADING PAPER...........................................14
CHANGING A TRAY’S PAPER SIZE
SETTING ........................................................16
2
COPY FUNCTIONS
NORMAL COPYING ........................................ 18
MAKING A COPY DARKER OR LIGHTER ....21
SELECTING THE TRAY.................................21
SETTING THE NUMBER OF COPIES ...........22
REDUCTION/ENLARGMENT/ZOOM .............. 22
AUTOMATIC RATIO SELECTION .................22
MANUAL RATIO SELECTION........................23
SELECTING THE VERTICAL AND HORIZONTAL
COPY RATIOS SEPARATELY
............................24
TWO-SIDED COPYING USING THE BYPASS
TRAY................................................................ 26
AUTOMATIC TWO-SIDED COPYING............. 27
IMAGE ROTATION IN DUPLEX
COPYING .......................................................29
DUAL PAGE COPYING................................... 30
INTERRUPTING A COPY RUN ....................... 31
3
CONVENIENT COPY FUNCTIONS
ROTATING THE IMAGE 90 DEGREES .......... 32
SORT COPY / GROUP COPY......................... 32
COPYING MULTIPLE ORIGINALS ONTO
A SINGLE SHEET OF PAPER ........................ 34
CREATING MARGINS WHEN COPYING ....... 36
ERASING SHADOWS AROUND THE EDGES
OF A COPY...................................................... 37
4
PRINTER/SCANNER FUNCTIONS
USING THE PRINTER MODE ......................... 39
BASIC PROCEDURE FOR PRINTING.......... 39
USING THE SCANNER MODE ....................... 40
SCANNING USING THE KEYS ON THE
MACHINE ...................................................... 40
SCANNING FROM YOUR COMPUTER........ 41
OPERATION IN COPY, PRINTER, AND
SCANNER MODES ......................................... 41
2
5
USER SETTINGS
ADJUSTING THE AUTOMATIC EXPOSURE
LEVEL .............................................................. 42
ENABLING TONER SAVE MODE................... 43
CUSTOMIZING SETTINGS ............................. 44
USER PROGRAMS ........................................44
SELECTING A SETTING FOR A USER
PROGRAM .....................................................47
SETTINGS FOR AUDITING MODE................. 48
AUDITING MODE ...........................................48
AUDITING MODE SETTINGS ........................48
SELECTING AUDITING MODE SETTINGS
......49
6
TROUBLESHOOTING
TROUBLESHOOTING ..................................... 52
MACHINE/COPYING PROBLEMS.................53
PRINTING AND SCANNING PROBLEMS .....56
INDICATORS AND DISPLAY MESSAGES .... 62
MISFEED REMOVAL....................................... 63
MISFEED IN THE SPF/RSPF.........................63
MISFEED IN THE BYPASS TRAY .................64
MISFEED IN THE MACHINE..........................65
MISFEED IN THE UPPER PAPER TRAY ......68
MISFEED IN THE LOWER PAPER TRAY) ....69
REPLACING THE TONER CARTRIDGE ........ 70
7
ROUTINE MAINTENANCE
CHECKING THE TOTAL OUTPUT COUNT
AND TONER LEVEL........................................ 71
CHECKING THE TOTAL OUTPUT COUNT...71
CHECKING THE TONER LEVEL ...................72
ROUTINE MAINTENANCE.............................. 72
CLEANING THE DOCUMENT GLASS AND
SPF/RSPF/DOCUMENT COVER...................72
CLEANING THE BYPASS TRAY PAPER
FEED ROLLER ...............................................73
CLEANING THE TRANSFER CHARGER ......73
8
PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES ................................. 74
SINGLE PASS FEEDER / REVERSING
SINGLE PASS FEEDER................................ 75
250-SHEET PAPER FEED UNIT /
2 X 250-SHEET PAPER FEED UNIT ............ 75
DUAL FUNCTION BOARD ............................ 76
STORAGE OF SUPPLIES............................... 76
PROPER STORAGE ..................................... 76
9
APPENDIX
SPECIFICATIONS ........................................... 77
SOFTWARE LICENSE .................................... 80
MATERIAL SAFETY DATA SHEET................ 82
INDEX .............................................................. 90
3
CAUTIONS
Follow the cautions below when using this machine.
CAUTIONS ON USING
Warning:
The fusing area is hot. Exercise care in this area when removing misfed paper.
Do not look directly at the light source. Doing so may damage your eyes.
Caution:
Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it
back on.
Machine power must be turned off before installing any supplies.
Place the machine on a firm, level surface.
Do not install the machine in a humid or dusty location.
When the machine is not used for a long time, for example, during prolonged holidays, turn the power switch off
and remove the power cord from the outlet.
When moving the machine, be sure to turn the power switch off and remove the power cord from the outlet.
Do not cover the machine with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat
dissipation, damaging the machine.
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous laser radiation exposure.
The socket-outlet shall be installed near the machine and shall be easily accessible.
IMPORTANT POINTS WHEN SELECTING AN
INSTALLATION SITE
Improper installation may damage the machine. Please note the following during initial installation and whenever the
machine is moved.
Do not install your machine in areas that are:
If the machine is moved from a cool place to a warm place, condensation may form inside the machine. Operation
in this condition will cause poor copy quality and malfunctions. Leave the machine at room temperature for at least
2 hours before use.
damp, humid, or very
dusty
exposed to direct sunlight
poorly
ventilated
subject to extreme
temperature or humidity
changes, e.g., near an
air conditioner or
heater.
Caution
4
The machine should be installed near an accessible power outlet for easy connection and
disconnection.
Be sure to connect the power cord only to a power outlet that meets the specified voltage and
current requirements. Also make certain the outlet is properly grounded.
Be sure to allow the required space around the machine
for servicing and proper ventilation.
CAUTIONS ON HANDLING
Be careful in handling the machine as follows to maintain the performance of this machine.
Do not drop the machine, subject it to shock or strike it against any object.
Store spare toner cartridges in a cool dry place without removing from the package before use.
If they are exposed to direct sunlight or excessive heat, poor copies may result.
Do not touch the photoconductive drum (green portion).
Scratches or smudges on the drum will cause dirty copies.
Trademark acknowledgements
•Microsoft
®
Windows
®
operating system is a trademark or copyright of Microsoft Corporation in the U.S.A. and
other countries.
Windows
®
95, Windows
®
98, Windows
®
Me, Windows NT
®
4.0, Windows
®
2000, and Windows
®
XP are trademarks
or copyrights of Microsoft Corporation in the U.S.A. and other countries.
IBM and PC/AT are trademarks of International Business Machines Corporation.
Acrobat
®
Reader Copyright
©
1987- 2002 Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo,
Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.
All other trademarks and copyrights are the property of their respective owners.
Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
Note
8" (20cm)
8"
(20cm)
8"
(20cm)
A small amount of ozone is produced within the machine during operation.
The emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m
3
) calculated as an 8 hr. time-
weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the
machine in a ventilated area.
Safety precautions:
This Digital Copier is rated Class I and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This
means that the machine does not produce hazardous laser radiation. For your safety, observe the precautions
below.
Do not remove the cabinet, operation panel or any other covers.
The machine’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by
inserting wedges or other items into switch slots.
5
ENVIRONMENTAL INFORMATION
USING THE MANUAL
This machine has been designed to provide convenient copying features in a minimum amount of office space and
with maximum operational ease. To get full use of all machine features, be sure to familiarize yourself with this
manual and the machine. For quick reference during machine use, keep this manual in a handy location.
ABOUT THE OPERATION MANUALS
The operation manuals for the machine are as follows:
Operation Manual (Digital Multifunctional System) (this manual)
This manual contains explanations of the product and procedures for using the machine as a copier.
Online Manual (on the accessory CD-ROM)
This manual explains the procedures for using the machine as a printer or a scanner.
Software Setup Guide (separate manual)
This manual contains instructions for installing the software that allows the machine to be used with your computer
and procedures for establishing initial printer settings.
THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE
INDICATIONS
An "R" appearing at the end of an original or paper size (5-1/2" x 8-1/2"R, 8-1/2" x 11"R, etc.) indicates that the original
or paper is oriented horizontally as shown below.
Sizes that can be placed only in the horizontal (Landscape) orientation (8-1/2" x 14", 11" x 17") do not contain the
"R" in their size indication.
As an
E
NERGY
S
TAR
®
Partner, SHARP has determined that this product meets
the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
USB 2.0 compatible (dual function board)
When connecting the machine by USB 2.0 (Hi-Speed mode), be sure to read "System
requirements for USB 2.0 (Hi-Speed mode)" (p.38) to verify that your system and the machine
settings are configured appropriately.
<Horizontal (Landscape) orientation>
6
CONVENTIONS USED IN THIS MANUAL
SPF AND RSPF
This operation manual refers to the Single Pass Feeder as the "SPF", and the Reversing Single Pass Feeder as the
"RSPF".
DIFFERENCES BETWEEN MODELS
This manual covers the following models.
Warns the user that injury may result if the contents of the warning are not properly followed.
Cautions the user that damage to the machine or one of its components may result if the contents
of the caution are not properly followed.
Notes provide information relevant to the machine regarding specifications, functions,
performance, operation and such, that may be useful to the user.
Warning
Caution
Note
Model AR-M205 AR-M160
Appearance
(With RSPF installed)
Copy speed 20CPM 16CPM
Automatic two-sided
copying/printing
Available Not available
Platen cover/SPF/RSPF
Platen cover (AR-VR5) [Option]
Reverse Single Pass Feeder
(AR-RP6) [Option]
Platen cover (AR-VR5) [Standard]
Single Pass Feeder (AR-SP6)
[Option]
Paper feed units Two (250 x 2) One (250 x 1)
The above illustration is used in
instances where a function and/
or the operation of the machine
is the same on both models.
7
MAIN FEATURES
High-speed laser copying
•First-copy time*
1
at 300 dpi*
2
is only 7.2 seconds.
Copying speed is 20/16 copies per minute at 600 dpi, This is ideal for business use and provides a big boost to
workplace productivity.
*
1
First-Copy time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
*
2
"dpi" ("dots per inch") are units that are used to measure resolution. Resolution indicates how much detail can be
reproduced in a printed or scanned image.
High-quality digital image
High-quality copies are possible in normal mode at 300 dpi and in photo mode.
In addition to automatic exposure adjustment, two original modes can be selected: "TEXT" for text-only originals,
and "PHOTO" for photographs. The exposure can be adjusted to five levels in each mode.
The photo mode copying function allows clear copying of delicate halftone original images such as monochrome
photos and color photos.
Enhanced copying features
Zoom copies can be made from 25% to 400% in 1% increments.
(When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.)
Continuous copying of up to 999 copies is possible. (Can be changed to a maximum of 99 copies in the user
programs.)
The user programs allow customized machine settings and management. Access to the machine can be
controlled by enabling audit mode.
The optional dual function board can be installed to enable use of Rotation copy and other convenient functions.
Scan once/Print many
The machine is equipped with a memory buffer allowing the machine to scan an original once and make up to 999
copies of the scanned image. This improves workflow, reduces operating noise from the machine and reduces
wear and tear on the scanning mechanism, which provides for a higher reliability.
Laser printer function
The accompanying printer driver can be installed to enable use of the machine as a printer. (See the
accompanying Software Setup Guide.)
Color scanner function
The accompanying scanner driver can be installed and the machine connected to a computer using a USB cable
to enable use as a scanner. (See the accompanying Software Setup Guide.)
Environment and people friendly design
Preheat and auto power shut-off modes are provided to reduce power consumption when the machine is not in
use.
A universal design makes the machine easy to use, even for inexperienced users.
A
A
AA
Erase copy* Margin shift* 2 IN 1 copy* 4 IN 1 copy*
Dual page copyRotation copy* XY-ZOOM copying
* When dual function board
is installed
8
1
Chapter 1
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
Document feeder cover (when the SPF/RSPF is
installed) /document cover (when the document
cover is installed)
Open to make copies from the document glass.
(p.18)
Document glass
Place an original that you wish to scan face down
here. (p.18)
Handles
Use to move the machine.
Power switch
Press to turn the machine power on and off. (p.12)
Operation panel
Contains operation keys and indicator lights. (p.10)
Paper output tray
Copies and prints are deposited to this tray.
Front cover
Open to remove paper misfeeds and perform
machine maintenance. (p.65, p.70)
Paper trays
Each tray holds 250 sheets of paper. (p.14)
Side cover
Open to remove paper misfeeds and perform
machine maintenance.
(p.64, p.73)
Side cover handle
Pull to open the side cover. (p.64)
Bypass tray guides
Adjust to the width of the paper. (p.15)
Bypass tray
Paper including special paper (such as transparency
film) can be fed from the bypass tray. (p.15
,
p.26)
Bypass tray extension
Pull out when feeding large paper such as 8-1/2" x
14" and 11" x 17". (p.15)
Charger cleaner
Use to clean the transfer charger. (p.73)
USB 1.1 port
Connect to your computer to use the printer and
scanner functions. (Software Setup Guide)
5
14
6
12 13
7
1
1
2
4
9
16
15
17
10
11
8
3
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
85
Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate
degree of lung fibrosis was observed in 92% of the rats in the high concentration
(16mg/m
3
) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of
the animals in the middle (4mg/m
3
) exposure group, but no pulmonary change was
reported in the lowest (1mg/m
3
) exposure group, the most relevant level to potential
human exposures.
12. ECOLOGICAL INFORMATION
No data are available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Waste material may be dumped or incinerated under conditions which meet all
federal, state and local environmental regulations.
Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal,
state and local environmental regulations.
14. TRANSPORT INFORMATION
UN Classification : None
Not classified as hazardous for transport.
15. REGULATORY INFORMATION
US Information
TSCA (Toxic Substances Control Act):
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA (Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance: None
311/312 Hazard Classification : None
EU Information
1999/45/EC and 67/548/EEC
Symbol & Indication : Not required
R-Phrase : Not required
76/769/EEC : All chemical substances in this product comply with all applicable rules
or order under 76/769/EEC.
16. OTHER INFORMATION
NFPA Rating (USA) : Health=1 Flammability=1 Reactivity=0
WHMIS Legislation (Canada) : This product is not a controlled product.
List of R phrases : R11 : Highly flammable
References
IARC (1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol.
65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon,
pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow,
U.Mohr, S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation
Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
The information on this data sheet represents our current data and best opinion as to the proper use in handling
of this product under normal conditions. However, all materials may present unknown hazards and should be
used with caution. Although certain hazards are described herein, we do not guarantee that these are the only
hazards which exist.
Page: 4/4
87

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp ARM160 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp ARM160 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sharp ARM160

Sharp ARM160 Gebruiksaanwijzing - Nederlands - 92 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info