699578
27
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
CA-6 SATEL 25
FS85 - programming test transmission time (DEC)
The function sets three time parameters which define the moments of sending the test
transmission code to the monitoring station.
The first parameter (two two-digit numbers: hours, minutes) enables the station to check if
the control panel clock works properly. The mechanism sending the code every day at the
same time can be disabled by programming a wrong time (for example, 99.99).
The second parameter (three two-digit numbers: number of days, hours, minutes) defines
the time counted from the last transmission to the station, after which test code will be sent
by the control panel. After occurrence in the system of any event whose code will be sent,
the panel starts counting the time again. This mechanism can be disabled by programming
00.00.00.
The third parameter (three two-digit numbers: number of days, hours, minutes) makes it
possible to program a separate period of the test transmission, valid only when the system
is armed (for example, when more frequent test transmissions are needed during the
armed mode). The control panel, when system is armed, calls the monitoring station every
period of time specified in the given function. If a new event occurs and the panel sends
its’ code to the monitoring station, then the countdown of the programmed time starts from
the beginning. When 00, 00, 00 value is entered, then, irrespective of whether the control
panel is armed or not, only the time programmed in FS 70 is used.
The programming consists in entering five two-digit numbers. After confirmation of all the
numbers, the panel exits the function.
EXAMPLE: programming the test code to be sent at 1:45 (clock test) and after two hours since the
last transmission (communication test), communication test, when system is armed –
every 15 min.
[12345] [#] - enter the service mode
[8][5] [#] - call the function
[0][1] [#] - enter the hours
[4][5] [#] - enter the minutes of clock test time (sending the message)
[0][0] [#] - enter the number of days,
[0][2] [#] - enter the number of hours,
[0][0] [#] - enter the number of minutes of the communication test time.
[0][0] [#] - enter the number of days
[0][0] [#] - enter the number of hours
[1][5] [#] - enter the number of minutes of the communication test during arm mode and terminate
the function
Note: If the test transmissions are conducted frequently (e.g. every 10 – 15 min.), it is
recommended to activate in function FS5 option number 5 of the first set. Thus
preventing the events memory of the control panel from being quickly filled up, since
only 3 successive events of the test transmission are then saved in memory of the
control panel.
FS86 - programming the „AC loss” report delay (DEC)
The function defines the time from the mains supply loss after which the panel will send an
„AC loss” message to the monitoring station. The delay time is programmed in minutes,
within the range from 01 to 99 minutes. The mains supply loss is signaled instantly in
keypads and on the AC
POWER LOSS
indicator outputs (function 25).
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Snelstart handleiding - English - 8 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info