699578
26
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
24 Programming CA-6
11  Panic alarm (from keypad)
12  Medical alarm (from keypad)
13  Alarm - keypad tamper
14  Alarm 3 incorrect codes
Notes:
The code 3 is recorded in the event log when the control panel is unable to establish
communication with the station. In that case, the control panel will retry after 60
seconds to establish connection. When it gets through, the control panel will transmit
all the unsent events from the memory. The events are sent by the panel in order of
their occurrence (the oldest event is sent first).
The code 4 is recorded in the event log when lack of communication with the station
lasted so long that all the memory intended for the events (255 events) has been filled
up and the oldest events have been erased.
The code 9 can be extended by the control panel with the user number.
FS83 - programming system event assignment to station 1 (BIT)
When the mode of notifying both stations is active, it is possible to determine for most
events, whether they will be transmitted to the station 1, station 2, or to both stations. The
other system events are reported to both stations.
The programming is a three-stage procedure, which consists in specifying events which
are to be sent to the station 1.
First stage - 1 to 8 LEDs show the following events (the lower B diode blinks):
1 - AC loss
2 - AC power restore
3 - Battery trouble
4 - Battery OK
5 - OUT1 trouble
6 - OUT1 trouble restore
7 - OUT2 trouble
8 - OUT2 trouble restore
Second stage - 1 to 6 LEDs show the following events (the lower A diode blinks):
1 - OUT3 trouble
2 - OUT3 trouble restore
3 - Service mode - start
4 - Service mode - end
5 - DOWNLOADING - start
6 - DOWNLOADING - end
Third stage - 1 to 5 LEDs show the following events (the A and B diodes blink):
1 - Fire alarm (from keypad)
2 - Panic alarm (from keypad)
3 - Medical alarm (from keypad)
4 - Alarm - keypad tamper
5 - Alarm 3 incorrect codes
FS84 - programming system event assignment to station 2 (BIT)
The function makes it possible to select system events sent to the station 2, when the
mode of reporting to both stations is active. The programming procedure is identical as in
FS83.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Snelstart handleiding - English - 8 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info