598871
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
1413
ADJUSTMENT OF CHAIR
Before sitting on the massage chair
OR
(Remote control) (Sensor controller)
Raise the back rest, and
lower the foot rest by
continuously pressing
the UP ( ) button.
Recline the back rest, and
raise the foot rest by
continuously pressing
the DOWN ( ) button.
Do not attempt to recline the back rest deeply at first (until the body is accustomed to massaging),
so that the massage force may be too strong.
Be sure to check that there is no-one or any pets around the massager prior to adjusting the back
rest. It may result in an accident or injury.
During massaging the legs, do not attempt to recline the back rest when the legs are fixed with
the air bag. Do not pull the legs out forcibly, this may result in injury to the legs.
NOTE
Head cover
5
Adjust the angle of the back rest.
The back rest and foot rest are moved in conjunction with each other.
Adjustment range
Approx. 50
120
Adjustment range
Approx. 90
Back rest
Foot rest
1
Sit on the center of massage chair.
Center of the chair
Foot rest
2
Adjust the position of head cover.
4
Press ZERO-G button to move the back rest,
foot rest, and the seat to achieve the desired
reclining position.
ZERO-G 1
Posture suited for whole body massaging
ZERO-G 2
Posture suited for lower body massaging
ZERO-G 1
(Slow flickering)
ZERO-G 2
(Rapid flickering)
Back rest
Foot rest
Hook-and-
loop fasteners
When the button is pressed, the lamp of the remote control
illuminates and the sole warmer will turn on.
When the foot rest is fully lowered, the foot rest will rise a little.
When the massaging rollers are not located in the upper section,
the massaging rollers will move to the upper section and stop.
(During the movement, the characters of "ORIGIN" on the remote
control flicker.)
3
Press the OPERATION ON/OFF button.
Press
Press
Adjust the attaching position with
hook-and-loop fasteners.
During the massage, adjust the head
cover not to touch the shoulders.
Do not attempt to climb onto or off the seat
by stepping on the foot rest. Do not attempt
to place anything or sit on the foot rest. The
user may fall over, resulting in an accident
or injury.
NOTE
For safety, check the position of the
massaging rollers before leaning slowly
back on the massager. Do not twist the
body, but lean straight back on the
massager, so that the massaging rollers
are in position on either side of the spine.
CAUTION
Sit deeply in the massage chair so that the
waist touches the back rest.
Bring all parts of the massage chair to
their home position by pressing the
HOME POSITION button.
Sitting on the massage chair while the foot rest is being raised
is dangerous. Be sure to lower the foot rest completely before
sitting on the massage chair.
The chair will be automatically brought to its home position by
pressing the HOME POSITION button.
Reclining positions change automatically at each press of the button.
(Button lights on when in reclining motion, flickering when not in reclining motion)
When switched from ZERO-G 1 to 2, the foot rest is raised first, and moves to the set angle.
When switched form ZERO-G 2 to 1, the back rest is raised first, and moves to the set angle.
Reclining can be stopped during the reclining motion by pressing either the ZERO-G button,
HOME POSITION button, RECLINING button, FOOT REST button, OPERATION ON/OFF button,
or STOP button.
When the reclining motion is stopped by pressing the STOP button, press the OPERATION
ON/OFF button to resume the operation.
When the reclining motion is stopped by pressing buttons other than the STOP button, press
the desired button for motion.
When back rest angle is adjusted from the ZERO-G 2, massaging other than Air Course can be
selected.
Keep the RECLINING button pressed until the desired angle is achieved.
Seat is lowered when adjusted at ZERO-G. (Seat only cannot be adjusted.)
Automatically starts massaging in Air
Course (Massaging besides Air Course
cannot be selected)
Foot rest may be raised
depending on the angle.
Downloaded from www.Manualslib.com manuals search engine
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sanyo HEC-DR7700 Massager Chair bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sanyo HEC-DR7700 Massager Chair in de taal/talen: Engels als bijlage per email.

De handleiding is 2,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info