10
EN
Replace the microfilter and the black foam
filter and close the cover.
5 • Clean the HEPA filter (17)
Unlock the air outlet grid on the side of the
appliance by rotating it slightly to the left
(fig.22) and remove it by pulling it (fig.23).
Remove the HEPA filter from its housing
(fig.24). Clean the HEPA filter by knocking it
gently over a dustbin (fig.25). Put it back in
its housing. Replace the air outlet grid and
lock it by rotating it slightly clockwise.
6 • Clean the separator (4)
Open the lid of the vacuum cleaner (fig.16-
17).
Press the separator button (fig.26) and
remove the separation system (fig.27).
Remove the separation compartment (4c) by
turning it slightly to the left (fig.28) then
separate the two components (fig.29).
Remove the separation grid (4b) (fig.30).
Wash the components (4a +4 b +4 c) in clear
water.
IMPORTANT
If the HEPA filter is
damaged, replace it. The HEPA filter is
available in Authorised Service Centres.
Leave them to dry for 6H (fig.31).
Put the parts of the filtration system (4) back
in place:
- replace the separation grid (4b) on the
separator (4a) (fig.32)
- replace the separation compartment (4c) on
the unit (4a + 4b) (fig.33-34)
- then replace the entire separation system
(4a+4b+4c) in the vacuum (fig.35) and close
the lid.
7 • Clean your vacuum cleaner
Wipe the body of the vacuum cleaner and
the accessories with a soft damp cloth, then
dry using a dry cloth.
Wash the dust compartment with water, then
dry with a dry cloth.
ATTENTION Leave the microfilter to
dry and make sure it is thoroughly dry
before putting it back in the appliance.
IMPORTANT
If after cleaning the black
filter foam and microfilter, your vacuum
cleaner does not resume its previous
performances, clean the HEPA filter.
Otherwise, clean the HEPA filter once a
year.
ATTENTION
Do not wash the vacuum
lid under water. Clean it with a soft damp
cloth.
IMPORTANT Do not use detergents or
any corrosive or abrasive products. The
transparency of the dust compartment
and/or the front and/or lid may change
over time. This does not affect
performance.
