3
B
1 • Assembling the elements
of the appliance
Push the flexible tube (fig.1) into the
suction opening and turn until it clicks into
place. To remove it, turn it in the opposite
direction and pull it. Fit the accessories clip
under the power nozzle (fig.2) and attach
the accessories on it (fig.2).
Assemble the telescopic tube* (fig.3).
Adjust it to the desired length (fig.3).
Fit the appropriate accessory to the end of
the tube (fig.4).
• For rugs and wall-to-wall carpeting: use the
head with brushes lifted.
• For parquets and smooth flooring: use the
nozzle with the brush extended or use the
parquet nozzle*.
• For corners and other areas that are difficult
to reach, use the crevice tool*.
• For furniture: use the upholstery nozzle*.
Shoulder strap*: remove the covers on either
side of the handle by pressing then turning
them. Clip the shoulder strap support* onto
the handle
(fig.5)
. Fit the shoulder strap in
place of the covers with the attachment clips
and press then turn
(fig.6)
.
Store the shoulder strap in its support
(fig.7).
1 • Remove packaging
Take your appliance out of its packaging.
Keep your warranty card and carefully read
the operating instructions before using your
appliance for the first time.
2 • Hints and precautions
Before each use the supply cord should be
completely unwound. Do not allow it to
become trapped or be pulled over sharp
edges.
If you use an extension cord, make sure that it
is in perfect condition and appropriate to the
power rating of your appliance. Never unplug
the appliance by pulling on the cord.
Do not move the vacuum cleaner by pulling on
the cord; the appliance must be moved using its
carrying handle or shoulder strap.
Never lift the appliance by its cord.
Stop and
unplug the appliance after each use. Always
turn off and unplug your appliance before
maintenance or cleaning.
This appliance is not designed to be used by people
(including children) with a physical, sensory or
mental impairment, or people without knowledge
or experience, unless they are supervised or given
prior instructions concerning the use of the
appliance by someone responsible for their safety.
Children must be supervised to ensure that they do
not play with the appliance.
Your vacuum cleaner is fitted with a safety
device to prevent the motor from overheating.
In certain cases (using the power nozzle on
armchairs, seats, etc.) the safety device may
be tripped and the appliance may emit an
unusual noise which is not serious.
Only use original Rowenta accessories and
filters.
Check that all the filters are properly in place.
Do not operate the vacuum cleaner without
the filtration system (foam and filters), or
without the protective motor foam or the
cover.
Do not fit the foams and filters to the
appliance unless they are completely dry.
In the case of difficulty in obtaining
accessories and filters for this vacuum
cleaner, contact the Rowenta customer
service department (see last page for contact
details).
BEFORE USING FOR THE FIRST TIME
USING THE APPLIANCE
IMPORTANT Always stop and unplug
your vacuum cleaner before changing
accessories.
IMPORTANT Do not operate the vacuum
cleaner without the filtration system (foam
and filters), or without the protective motor
foam.
2 • Plugging in the electrical
power cord and using the
vacuum cleaner
Completely unwind the power cord, plug in
your vacuum cleaner and push the on/off
pedal (fig.8).
Adjust the suction power: with the manual
suction regulator* on the grip: open the
regulator flap to manually reduce suction,
e.g. for fragile surfaces… (fig.9).
*Depending on model:
this is either equipment specific to certain models or available as an optional accessory.
GB
