647744
74
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
74
Chapter 3. Creating Your Own Sounds
Start (Portamento Start Pitch)
Portamento will begin anew if you press another key during
a pitch movement. This setting specifies how the new
portamento will start.
PITCH: Pitch will begin changing when the new key is
pressed.
fig.3-30.e
NOTE: Pitch will begin changing from the destination of the
current movement.
fig.3-31.e
RxSWITCH (Receive Switch)
These parameters determine how Volume/Pan/Pitch Bend
MIDI messages will be received by each Tone.
* In general, Volume messages control the volume, Pan messages
control the stereo location, and Pitch Bend messages control the
pitch of. However the XP-30 allows you to use these MIDI
messages to control other parameters that you specify. Thus, if
you are using a message to control another (i.e., a non-standard)
parameter, you should turn off reception for that MIDI message.
If reception is turned on, that MIDI message will control its
standard function in addition to the special assignment you
have made.
Volume (Receive Volume Switch)
If you want Volume messages to be received, turn this
parameter ON. If not, turn it OFF.
Pan (Receive Pan Control Switch)
Specify how Pan messages will be received.
OFF: Not received.
CONT: Whenever a Pan message is received, it will
immediately change the stereo location of the
sound.
KEY-ON: The stereo location of the sound will be changed
when the next note is played. If a Pan message is
received while a note is sounding, the current
stereo location will not change until the next note.
In this case, the stereo location will change only
for the note played later, and the currently
sounding note will not move.
Pitch Bend (Receive Pitch Bend Switch)
If you want Pitch Bend messages to be received, turn this
parameter ON. If not, turn it OFF.
DAMPER
Specify how Hold 1 (sustain pedal) messages will be received
by each Tone.
Hold-1 RxSwitch (Receive Hold 1 Switch)
If you want Hold 1 messages to be received, turn this
parameter ON. If not, turn it OFF.
Redamper (Redamper Switch)
If a Hold 1 message is received during the time between a
note-off (when you release the key) until when the sound
disappears, the currently sounding sounds will be sustained
if this Redamper setting is ON. If you use this function, you
must also turn on the Receive Hold 1 switch.
PEAK & HOLD
Hold messages (Hold 1, Hold 2, Sostenuto, Soft) are used to
sustain the sound. The XP-30 allows you to use these Hold
messages to hold the values of specific parameters.
* If you use this function, you must also turn on the Receive Hold
1 switch for the Patch (previous screen).
* If you select HOLD for the following parameters, you must also
set the Hold parameter (SYSTEM/CONTROL/CONTROL
SOURCE) to the type of Hold message being controlled.
* If you select PEAK for the following parameters, you must also
set the Peak parameter (SYSTEM/CONTROL/CONTROL
SOURCE) to the type of Hold message being controlled.
C5
D4
C4
press D4 key
Pitch
Time
press C4 key
press C5 key
C5
D4
C4
press D4 key
Pitch
Time
press C4 key
press C5 key
74

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info