647744
75
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
75
Chapter 3. Creating Your Own Sounds
Chapter 3
EfxCtrl (EFX Control Peak/Hold)
Specify how Hold messages will affect the parameters you
specify in the PATCH EFX CTRL display (PATCH/
EFFECTS).
OFF: Parameter values will not be held even if Hold
messages are received.
HOLD: Parameter values will be held when Hold messages
are received.
PEAK: Parameter values will be held when Hold messages
are received. However if a parameter value higher
than the current one is received while Hold is still
on, that new value will be held.
Ctrl 1 (Control 1 Peak/Hold)
Specify how Hold messages will affect the parameters
controlled by Control Source 1 (Modulation: MIDI controller
number 1). The settings are the same as for EFX Control.
Ctrl 2 (Control 2 Peak/Hold)
This parameter specifies the way in which Hold messages
will control the parameter selected as Control Source 2 in the
following display. The range of values is the same as for EFX
control.
Ctrl 3 (Control 3 Peak/Hold)
This parameter specifies the way in which Hold messages
will control the parameter selected as Control Source 3 in the
following display. The range of values is the same as for EFX
control.
CONTROL SOURCE
If you wish to use controllers to control a specific Tone
parameter, select the controller in this display. Each Patch
can have up to 3 control source assigned to it, but the
function of control source 1 is fixed at Modulation (MIDI
controller number 1).
Control 2 (Control Source 2)
Assign one of the following controllers to Control Source 2. If
you want to use a controller that will be common to all
Patches, or to use a controller that is not available for
selection here, first select SYS-CTRL 1 or SYS-CTRL 2 then set
the Control 1/2 parameter (SYSTEM/CONTROL/SYS-CTRL
ASSIGN) to select the controller.
OFF: a controller will not be used
SYS-CTRL1: System controller (Control 1)
SYS-CTRL2: System controller (Control 2)
MODULATION: Modulation (MIDI controller number 1)
BREATH: Breath (MIDI controller number 2)
FOOT: Foot (MIDI controller number 4)
VOLUME: Volume (MIDI controller number 7)
PAN: Pan (MIDI controller number 10)
EXPRESSION: Expression (MIDI controller number 11)
BENDER: Pitch bend
AFTERTOUCH: Aftertouch
LFO1: LFO1 rate
LFO2: LFO2 rate
VELOCITY: Velocity
KEYFOLLOW:
Key follow (adjust the parameter value
depending on the keyboard location, relative
to a standard value (0) at the C4 key)
PLAYMATE: Playmate (adjust the parameter value
depending on the time length that the key is
pressed)
Control 3 (Control Source 3)
Assign a controller to Control Source 3. The controllers
available for selection are the same as for Control Source 2.
CONTROL 13
Specify the parameters to be controlled by Control Sources 13
and the depth of each parameter. The upper line of the display
will show the Control Source selected in the previous display.
* From the PATCH PLAY display you can switch directly to the
CONTROL1 display by pressing [CONTROLLER] while
holding down [SHIFT].
Destination 14
Select the parameters to be controlled. Up to four parameters can
be specified for each controller, and controlled simultaneously.
OFF: no control
PCH: WG Pitch
CUT: TVF Cutoff Frequency
RES: TVF Resonance
LEV: TVA Level
PAN: TVA Pan
MIX: Output level of Tone
CHO: Chorus Send level of Tone
REV: Reverb Send level of Tone
PL1: LFO1 depth of WG Pitch
PL2: LFO2 depth of WG Pitch
FL1: LFO1 depth of TVF Cutoff Frequency
FL2: LFO2 depth of TVF Cutoff Frequency
AL1: LFO1 depth of TVA Level
AL2: LFO2 depth of TVA Level
pL1: LFO1 depth of TVA Pan
pL2: LFO2 depth of TVA Pan
L1R: LFO1 rate
L2R: LFO2 rate
Depth 14
Adjust the amount of change that will occur in response to
controller movement. Higher value will cause greater
change. Negative (-) values will reverse the direction of the
change. For LFO rates, negative (-) values will lengthen the
period (causing slower modulation), and positive (+) values
will shorten the period (causing faster modulation).
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info