520094
81
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
Motor
FX-40
‘Speed 1’ and ‘Speed 2’. This facility includes the option of
setting different delay times for each direction of switching
(‘there’ and ‘back’). Simply mark the appropriate field, then
use the arrow buttons to set the desired value. The range is 0
to 27 increments, with the maximum figure corresponding to a
delay of nine seconds. The default is no switch-over delay (0
increments).
The screen shot shows a sensible programming set-up for this
option.
The screen shot below shows typical programmed settings for
the ‘Motor off’ option.
Ensure that the ‘Motor off’ settings coincide with the Fail-Safe
settings for the motor control system.
If the motor switch is in the ‘On’ position when you switch the
transmitter on, a visual and audible warning signal is triggered
in the interests of safety. Operate the motor switch to reset
(switch off) the alarm.
80
18.17 MOTOR SETTINGS
This menu is used for entering the settings for switching an
electric motor on and off, and is of particular inter
est for con-
trolling the electric motor in a hot-line model using a simple
switch. It is possible to program two different motor speeds for
slow and fast flight (Speed 1 / Speed 2). In this case you will
need to assign a three-position switch to the function.
It is important to check that the propeller fitted to the motor is
capable of absorbing the loads, especially for the ‘Speed 2’
setting. A ‘Once mode’ is provided; when this option is selec-
ted, the settings can only be changed within the menu.
This menu is only available if you have selected an electric-
powered model (Motor glider) as model type in the Base menu.
Once you have done that, mark the ‘Motor’ option in the Model
menu. The screen now looks like this:
The first step is to activate this mixer function in the Status line.
Mark the field, and the same field then displays ‘ON’ or ‘OFF’
instead of ‘INA’ (inactive), according to the position of the
switch.
The effects and method of setting the ‘Glob’ or ‘Sepa’ mode
have already been described; the function is programmed using
the appropriate switch field.
A switch can be defined to trigger the mixer, using the standard
procedure: mark the appropriate field and define the desired
switch and its direction of operation in the switch select menu
which then appears. The default setting is ‘NONE’, which
means that the mixer is permanently switched on.
Move to the ‘Motor off’ line, where you can define the switch
position at which the motor is to be switched off. Mark the field
and move the switch to the ‘OFF’ position, then confirm the
security query with ‘Yes’. The setting is now stored, and is dis-
played in the field as a percentage value.
The speed settings are entered In a separate frame; this sub-
menu must again be activated in the Status line initially. You can
then decide whether to activate ‘Once mode’. The setting is
selected using exactly the same procedure as for activating a
mixer.
The next step is to define the speed limits, i.e. the ranges for the
two motor speeds. Mark the appropriate field, and use the
arrow buttons to set the values you require. The adjustment
range is -100% to +100%; the default setting is 0%. The setting
is displayed in graphic bar form on the screen, and as a per-
centage value in the field.
The last task is to define the transition rate for switching bet-
ween the speed settings; this is carried out separately for
81

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info