520094
79
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
V-tail / Ailvator
FX-40
18.14 V-TAIL SETTINGS
This menu presents all the mixer
functions r
equired for controlling
a V-tail, which involves superim-
posing the signals from the rud-
der and elevator controls at the
transmitter. The travels of the ele-
vator function (same-sense
movement) and of the rudder function (opposite-sense move-
ment) can be adjusted independently of each other. The
sketch shows the assignment of the servos for a typical V-tail.
Mark the ‘V-tail’ option in the Model menu. The screen display
now looks like this:
The first step is to define the mode (‘Glob’ or ‘Sepa’) in the
usual way, after which the servo travels for both control surfa-
ces of the V-tail can be set separately for the elevator and rud-
der functions in the form of percentage figures. The same
applies to the directions of movement; this procedure has alre-
ady been described in full many times: first mark the appropri-
ate field, then enter the percentage value using the arrow but-
tons.
The adjustment range is -120% to +120%; the default setting
in each case is 50%. Pressing the ‘Reset’ field restores the
default setting. The prefix determines the direction of travel. If
you change a prefix, the software automatically reverses the
direction of the paired control surface.
With the programming procedure complete, the screen might
look like this.
Once you have entered the data, it is essential to carry out a
check using the model itself, to ensure that the V-tail mixer is
operating correctly, and that all the settings are as required.
Check also that the total travel is not excessive, i.e. that the
system is not restricted or obstructed mechanically in any way.
18.15 AILVATOR
ELEVATOR WITH AILERON FUNCTION
This menu pr
esents all the mixer
functions r
equired for controlling a
pair of elevators which are also
used to generate a rolling moment
(around the longitudinal axis) to
support the wing-mounted
ailerons, i.e. both elevator panels
deflect in parallel with the ailerons.
This option is employed to provide an effective increase in the
roll rate of a fixed-wing model aircraft. The mixer can only be
used if the model is fitted with two elevator servos, each con-
nected to a separate receiver output. The function is someti-
mes called an ‘Ailvator’ system. It be used with normal tails
and also for models with a V-tail (ruddervator). The drawing
shows the arrangement of the functions in the case of a con-
ventional tail.
Mark the ‘Ailvator’ option in the Model menu. The screen now
looks like this:
The first step is to define the mode (‘Glob’ or ‘Sepa’) in the
usual way, after which the servo travels for both control surfa-
ces of the V-tail can be set separately for the elevator and
aileron functions in the form of percentage figures. The same
applies to the directions of movement; this procedure has
been described in full many times: first mark the appropriate
field, then enter the percentage value using the arrow buttons.
The adjustment range is -120% to +120%; the default setting
in each case is 50%. Pressing the ‘Reset’ field restores the
default setting. The prefix determines the direction of travel. If
you change a prefix, the software automatically reverses the
direction of the paired control surface.
With the programming procedure complete, the screen might
look like this.
When you activate a model with two separate elevator panels,
the second elevator is included in the mixer, and the aileron
channel is also mixed into the elevator signal automatically. If
you do not wish the elevators to move when an aileron com-
mand is given, you must set the aileron inputs to 0%. The fol-
lowing screen shot shows a programming set-up which takes
this into account.
78
Elevator
(Rudder 2)
Rudder
(Elevator 2)
Elevator
(Aileron 5)
Elevator 2
(Aileron 6)
79

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info