520094
78
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
Gyro settings
FX-40
18.13 GYRO SETTINGS
If you wish to use a gyro in a fixed-wing model air
craft in order
to stabilise one flight axis, this is the menu you use for entering
the settings for the gyro. The basic purpose of this menu is to
allow the pilot to adjust gyro gain (sensitivity) from the trans-
mitter for a maximum of three gyros - i.e. one for each primary
axis of the model aeroplane.
Gyro gain can simply be programmed as a percentage value,
but it is also possible to select the gyro type. You can assign a
switch which is used to set the gain to any of three values from
the transmitter. As with many functions, it is also possible to
determine whether the settings are to apply to all flight modes
(Glob) or only to the currently activated flight mode (Sepa).
Mark the ‘Gyro’ option in the Model menu. The screen now
looks like this:
The menu features three identical levels which are used to
enter three different gain levels (Rates 1 - 3). This function
must first be activated in the Status line in the usual way by
marking the appropriate field; the field will then switch to ‘ON’
or ‘OFF’, according to the position of the switch. Please note
that this only occurs if you have assigned and activated a
channel for adjusting gyro gain in the ‘Function’ menu of the
Base menu (Section 16.7).
In the ‘Type’ column you should enter the type of gyro installed
in the model. For AVCS or ‘heading hold’ gyros enter ‘GY’ as
the type; for others select the ‘NORM’ type. In the ‘Switch’
column you can select a switch and its direction of operation
using the familiar procedure. The default setting is ‘NONE’, i.e.
the function is constantly switched on. The effects and
method of setting the ‘Glob’ or ‘Sepa’ mode have already
been described; the settings are adjusted at far right on the
screen.
The fields for setting the gain levels for the (max.) three gyros
are grouped together in a separate field. If you have entered
‘GY’ as gyro type, you have the option of choosing whether it
is to work in normal (NOR) or ‘AVCS’ mode; this applies to
each gyro separately. For more information on this, please
refer to the instructions supplied with the gyro you are using.
The gain for the three (possible) gyros is entered in the usual
way as a percentage value, with the help of the arrow buttons.
In each case the adjustment range is 0% to 100%; the default
setting is 0%. Pressing the ‘Reset’ field restores the default
setting.
This screen shot shows a sensible programming set-up for the
Gyro function.
You should program a gain value for each gyro installed in your
fixed-wing model aircraft. Currently this setting is not effective,
as switch ‘D’ is in the ‘OFF’ position. This state is displayed In
the Status field.
Gyro 1 is a normal gyro, and the gain setting you can call up is
set to 30%. Gyro 2 is working in heading-hold mode with a
pre-set of 20%. The third gyro is also a heading-hold gyro,
with a switchable sensitivity of 30%. In our example the set-
tings apply to all flight modes.
For a more complex model aircraft equipped with two aileron
servos and a triple-axis stabilisation system, the following set-
tings would be typical:
Gyro 1 (GYA351) channel 7, gyro 2 (GYA352) channel 8, gyro 3
(GYA352) channel 9 (these channel assignments are set in the
Function menu)
RATE 1: OFF; GY; SW-E; GRP; NORM (60%); NORM (60%)
NORM (60%)
RATE 2: INH; GY; NONE; GRP; AVCS (0%); AVCS (0%); AVCS
(0%)
RATE 3: OFF; GY; SE-E; GRP; AVCS (60%); AVCS (60%);
AVCS (60%)
77
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info