587878
11
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
11
Press the power key [].
-All displays and device functions
are now switched off-
If the units are
inactive for long
periods, disconnect
them from the mains
power supply.
Empty the condensate container
completely and dry with a clean
cloth.
Beware of dripping condensate!
The units must be cleaned and
dried completely before storing.
Each time before changing the
location, drain residual condensate
from the condensate trap.
To do this, use the union nut [A]
and the sealing plug [B] to open
the condensate connection nozzle.
Tip the unit slightly backwards to
drain the residual condensate into
a suitable container.
Then re-seal the condensate
connection nozzle carefully in
reverse order.
When storing the units, cover with
a plastic sheet/foil if necessary
and store in an upright position in
a sheltered and dry location.
Continuous unit operation
with external condensate
outlet
The units are equipped with
a condensate connection nozzle on
the rear.
A special (1m) drainage hose that
is supplied can be connected here.
1. Unscrew the union nut [A] (turn
anticlockwise).
2. Pull the sealing plug [B] out of
the connection nozzle.
3. Push the drainage hose with the
smooth end through the rear of
the union nut [A].
Shutdown
Ensure that the drainage hose
is placed at an incline to the
drain to allow the condensate
to drain without hindrance!
CAUTION
!
After you plug in the adapters
[SA], , the pump is immediately
ready for operation and can convey
water immediately if required.
CAUTION
!
The units are only permitted
to be stored upright in
a suitable storage location that
is protected against dust and
direct sunlight.
NOTE
The pump function is only
possible via the connection
adapter [SA] provided.
NOTE
Continuous unit operation via
the internal condensate pump
For applications in locations
without a drain, the devices are
fitted with a condensate pump
especially for this.
You can use this to provide various
condensate drainage options
according to the local conditions.
The patented condensate pump
connectionpanel [KP] is located on
the rear of the units.
Carefully connect the connection
adapter [SA] provided here.
4. Screw the drainage hose onto
the connection nozzle using the
union nut [A].
A B
The hose supplied as standard has
a length of 5 metres. The customer
can extend this to 10 metres if
required.
CAUTION! Do not kink the hose!
A height difference of up to
5 metres can be bridged using the
integrated condensate pump.
In unattended permanent
operating mode, the condensate
should preferably be drained into
a lower-level drain.
If using an external collection
container (pan, bucket, etc.), the
unit must be placed at a correct
height.
SA
KP
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO ETF360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO ETF360 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO ETF360

REMKO ETF360 Gebruiksaanwijzing - Nederlands - 20 pagina's

REMKO ETF360 Gebruiksaanwijzing - Deutsch - 20 pagina's

REMKO ETF360 Gebruiksaanwijzing - Français - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info