587878
10
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
10
REMKO ETF 360/460
Automatic defrost system
The moisture contained in the
room air condenses when cooling
and coats the evaporator fins
with rime or ice depending on the
air temperature and the relative
humidity (% RH).
The automatic defrost system that
is integrated in the unit switches the
defrost cycle on if required.
The rime or ice that has
accumulated on the exchanger
surfaces is defrosted using heat gas
as required.
This defrosting method is particularly
fast and effective, and guarantees
high dehumidification performance.
Dehumidification mode is only
paused for a short time during the
defrost phase.
The [] indicator light indicates
that the heat gas defrost cycle is
active.
Emptying the condensate container
Depending on the amount of
condensate, the integrated
condensate container must be
emptied from time to time.
If the condensate container is full,
unit operation is stopped and the
[] “Container full” indicator
light flashes to indicate this unit
condition.
1. Pull the full container forwards
and out carefully.
2. Empty the container in
a suitable location.
s
s
s
Activating the timer
You can use the timer function
to preselect automatic unit “ON/
OFF” switching functions for up to
24 hours (in 1 hour cycles).
Timer switching functions
Setting in running operation:
After the selected number of
hours, the unit switches OFF.
Setting
if the unit is switched off
(the power plug must be plugged
in to a mains socket):
After the selected number of
hours, the unit switches ON.
You can use the [] key to
activate the timer function
and the [] keys to select the
required times in 1 hour steps
(maximum of 24 hours).
The entries flash on the display []
for around 10 seconds.
Timer activation is indicated
continuously by the indicator
light [] on the control panel.
If the room temperature is
sufficiently high (approx.
20 °C), rime is generally
not formed on the fin
surface, rendering defrosting
unnecessary.
Therefore, the air dehumidifier
works economically.
NOTE
The unit can only be started up
again once the condensate container
has been inserted correctly.
NOTE
The unit can be operated via
an external timer if necessary.
NOTE
After being emptied, the
condensate container incl.
float must be checked for
damage, contamination etc.
NOTE
If the unit is switched on via
the power key, all set data is
retained if the power supply is
disconnected.
NOTE
3. Re-insert the emptied and
checked container carefully into
the unit.
The “Container full” indicator
light extinguishes and the unit
continues to run automatically.
(Observe the switch-on delay)
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO ETF360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO ETF360 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO ETF360

REMKO ETF360 Gebruiksaanwijzing - Nederlands - 20 pagina's

REMKO ETF360 Gebruiksaanwijzing - Deutsch - 20 pagina's

REMKO ETF360 Gebruiksaanwijzing - Français - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info