782209
5
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
-5-
Additional safety instructions
This milling machine is for indoor use only.Do not expose
to rain or use in damp locations.
Use only accessories recommended for this milling
machine. Follow the instructions that accompany
accessories.Use of improper accessories may cause
hazards.
Do not attempt to modify this tool or createaccessories not
recommended for use with this tool. Any suchalternation or
modification is misuseand could result in hazardous
condition leading to possible serious injury.
Toavoid injury from unexpected starting or electrical shock,
do not plug the power cord intoapower source receptacle
during unpacking and assembly.This cord must remain
unplugged whenever you are working on the milling
machine.
Ifany part is missing or damaged,do not plug the milling
machine in until the missing or damaged part is replaced,
and assembly is complete. Toavoid electrical shock, use
only identical replacement parts when servicing grounded
tools.
For your safety,never connect the plug to the power source
receptacle until the assembly and adjustment steps are
completed, and you have readand understood the safety
and operating instructions.
Toavoid injury from accidental start,make sure the switch
is in the OFF position and the plug is not connected to the
power source receptacle beforechanging any parts or tools
(i. e. miller).
Toavoid injury from accidental start,make sure the switch
is in the OFF position and the plug is not connected to the
power source receptacle before making any adjustments.
For your own safety,do not plug the tool into the power
source receptacle or insert the switch key, until the parts
arecorrectly installed and adjustments havebeen made.
For your own safety, use only millers sized and recommen-
ded for this milling machine. Follow the instructions that
accompany the millers.
Toavoid fire or toxic reaction,never use gasoline,naphtha,
acetone,lacquer thinner,or similar highly volatile solvents to
clean the milling machine.
Do not allow brake fluids,gasoline,or penetrating oils to
come in contact with the plasticparts.They contain
chemicals that can damage or destroy plastics.
Only qualified service technicians should do all electrical or
mechanical repairs.
When servicing use only PROXXON replacement parts.Use
of any other parts may createahazard or cause product
damage.
Any attempt to repair or replace electrical parts on this lathe
may createahazard unless repair is done by aqualified
service technician. Repair service is available at your
PROXXON servicecenter (You find the address at the back
of this manual).
Grounding instructions
1. All grounded, cord-connected tools:
In the event of amalfunction or breakdown,grounding
provides apath of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped with
an electric cord having an equipment-grounding conductor
and agrounding plug. The plug must be plugged intoa
matching outlet that is properly installed and grounded in
accordance withall localcodes and ordinances.Do not
modify the plug provided -if it will not fit the outlet,have the
proper outlet installed by aqualified electrician.
Improper connection of the equipment-grounding conduc-
tor can result in a risk of electric shock. The conductor with
insulation having an outer surface that is green with or
without yellow stripes is the equipment-grounding
conductor.If repair or replacement of the electric cord or
plug is necessary,do not connect the equipment-grounding
conductor toalive terminal. Check withaqualified
electrician or service personnel if the grounding instructions
are not completely understood,or if in doubt as to whether
the tool is properly grounded. Use only
3-wire extension cords that have 3-prong grounding plugs
and
3-pole receptacles that accept the tool's plug.
Repair or replace damaged or worncord immediately.
2.Grounded, cord-connected tools intended for use on a
supply circuit having anominal rating less than 150 volts:
This tool is intended for use on a circuit that has an outlet
that looks like the one illustrated in SketchAin Figure 18.
The tool has agrounding plug that looks like the plug
illustrated in SketchAin Figure 18 A temporary adapter,
which looks like the adapter illustrated in Sketches B and
C, may be used toconnect this plug toa 2-pole receptacle
as shown in SketchBif aproperly grounded outlet is not
available. The temporary adapter should be used only until
aproperly grounded outlet canbe installed by aqualified
electrician. The green-colored rigid ear,lug, and the like,
extending from the adapter must beconnected toa
permanent ground suchas aproperly grounded outlet box.
Grounding methods
Fig. 18
ADAPTER
GROUNDING GROUNDING
MEANS
METAL SCREW
COVER OF GROUNDED
OUTLET BOX
<A><B>
<C>
<D>
PIN
PIN
GROUNDING
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon FF 230 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon FF 230 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info