782209
4
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
ManualFF 230/PD 230/KT230
Foreword
Dear Customer,
This instruction manual deals with the PF 230 and the compo-
und-type table KT 230 tobe used with it.It addresses those of
our customers having purchased the compoundtype table, the
milling machine,or bothas the type FF 230 machine. No mat-
ter what your preference was: Read this manualcarefully befo-
re using your machine and observe the instructions.Please
pay particular attention to the safety instructions and always
work with duecare.
This instruction manualcovers:
Foreword....................................4
Safety regulations .............................4
Additional safety instructions ....................5
Grounding instructions . . . . . . . . . . . . . . . . . . . . . . . . .5
Description of the machine . . . . . . . . . . . . . . . . . . . . . .6
Technical data................................7
PF 230 milling machine technical data.............7
KT 230 compound-type table technical data........7
Assembly of the milling machine .................7
Mounting on lathe PD 230/E.....................7
Mounting of milling machine on KT 230
compound-type table . . . . . . . . . . . . . . . . . . . . . . . . . .7
Adjustment of the milling spindle .................8
Swivelling the milling spindle ....................8
Assembly of the clamping devices ................8
Setting the spindle rotational speed ...............8
Working with the machine . . . . . . . . . . . . . . . . . . . . . . .8
Repair and maintenance. . . . . . . . . . . . . . . . . . . . . . . .9
Setting compound-type table guide play ...........9
Setting compound-type table spindle play ..........9
Lubricating the machine . . . . . . . . . . . . . . . . . . . . . . . .9
After use....................................9
Spare parts lists
PF 230 milling machine . . . . . . . . . . . . . . . . . . . . . . . . .11
KT 230 compound-type table ....................12
Please readcarefully!
Using this instruction manual will
make it easier for you
to get used to the machine
help prevent
faults occurring due to improper useand
increase
the service life of your machine.
Safety regulations
1. 1. KEEP GUARDS IN PLACE and in working order.
2.REMOVE ADJUSTING KEYS AND WRENCHES.Form habit
of checking to see that keys and adjusting wrenches are
removed from tool before turning it on.
3.WORK AREA CLEAN.Cluttered areas and benches invite
accidents.
4. DON'T USE IN DANGEROUS ENVIRONMENT.Don't use
power tools in damp or wet locations,or expose them to
rain. Keep workarea well lighted.
5. KEEP CHILDREN AWAY.All visitors should be kept safe
distance from workarea.
6.MAKE WORKSHOP KID PROOF with padlocks,master
switches,or by removing starter keys.
7.DON'T FORCE TOOL.It will do the job better and safer at
the rate for which it was designed.
8. USE RIGHT TOOL.Don't force tool or attachment to do a
jobfor which it was not designed.
9. USE PROPER EXTENSION CORD.Make sure your exten-
sion cord is in good condition. When using an extension
cord, be sure to use one heavy enough tocarry the current
your product will draw.An undersized cord will causea
drop in line voltage resulting in loss of power and overhea-
ting. Table 1 shows the correct size to use depending on
cord lengthand nameplateampere rating. If in doubt, use
the next heavier gage. The smaller the gage number, the
heavier the cord. Exception No. 1: The reference to the
table and the table itself may be omitted if a statement
indicating the appropriate gage and length is incorporated
into the instruction. Exception No. 2: The information
regarding extension cords need not be provided for aper-
manently connected tool.
10.WEAR PROPER APPAREL.Do not wear looseclothing,
gloves,neckties, rings, bracelets,or other jewelry which
may get caught in moving parts.Non-slip footwear is
recommended. Wear protective hair covering tocontain
long hair.
Exception: The reference to gloves may be omitted from
the instructions for agrinder.
11. ALWAYS USE SAFETY GLASSES.Also use face or dust
mask if cutting operation is dusty.Everyday eyeglasses
only have impact resistant lenses, they areNOT safety
glasses.
12.SECURE WORK.Useclamps or a vise to hold work when
practical. It's safer than using your hand and it frees both
hands to operate tool.
13.DON'T OVERREACH.Keep proper footing and balanceat
all times.
14. MAINTAIN TOOLS WITH CARE.Keep tools sharpand
clean for best and safest performance. Follow instructions
for lubricating and changing accessories.
15. DISCONNECT TOOLS before servicing; when changing
accessories, suchas blades, bits, cutters, and the like.
16.THE RISK OF UNINTENTIONAL STARTING.Make sure
switch is in off position before plugging in.
17.USE RECOMMENDED ACCESSORIES.Consult the
owner's manual for recommended accessories.The use of
improper accessories may cause risk of injury to persons.
18. NEVER STAND ON TOOL.Serious injury could occur if the
tool is tipped or if the cutting tool is unintentionally contac-
ted.
19. CHECK DAMAGED PARTS.Before further use of the tool,
aguard or other part that is damaged should becarefully
checked to determine that it will operate properly and per-
form its intended function -check for alignment of moving
parts, binding of moving parts, breakage of parts,moun-
ting, and any other conditions that may affect its operation.
Aguard or other part that is damaged should be properly
repaired or replaced.
20.OF FEED.Feed work intoa blade or cutter against the
direction of rotation of the blade or cutter only.
21. NEVER LEAVE TOOL RUNNING UNATTENDED.TURN
POWER OFF.Don't leave tool until it comes toa complete
stop.
-4-
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon FF 230 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon FF 230 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info