8
Surround Mode
According to the broadcast sound modes, select the Surround Sound
possibilities:
Pro Logic with Dolby Pro Logic broadcasting. Nice effects can be reached in
Pro Logic mode with good stereo broadcasts.
Dolby 3 Stereo if no surround speakers are connected or if
oversynthesized sounds result in annoying surround effects.
Hall with mono or poor stereo broadcasting.
Off if you want to switch off Surround Sound.
Which loudspeakers are active, depends on the selected Surround mode.
See Dolby Pro Logic Install, p. 14.
Note: If you have only connected a right and left external loudspeaker and no centre
speaker, select Pro Logic and not Dolby3 Stereo in the Surround
Mode menu item. See also Centre mode, Phantom selection.
Centre Mode (only selectable in Dolby 3 Stereo or Pro Logic when you have
connected and selected external loudspeakers and if connected
an external amplifier)
With internal speakers: the item centre mode can not be selected.
With external speakers: (external left and right loudspeakers and a centre
loudspeaker. See Connect Peripheral Equipment, External Loudspeakers,
p. 23)
Note : Do not forget to put the red loudspeaker button at the back of the receiver in
the
EXTERNAL SPEAKERS position.
• When in Surround Mode you have selected Pro Logic, you can select
Normal, Phantom or Wide in the Centre Mode;
• When in Surround Mode you have selected Dolby 3 Stereo, you can
select Normal or Wide in the Centre Mode;
• Select Phantom if no external centre speaker is connected;
• Select Normal if you have connected a small centre speaker which can not
reproduce low frequencies (< 100 Hz);
• Select Wide if you have connected a full range external centre speaker.
Information Line
After the selection of a TV channel or after pressing the i key on the
remote control, a TV channel which broadcasts teletext may transmit the
name of the TV channel or the channel name or another message which
appears briefly in the information line at the bottom of the screen.
When selected Off, the information line will only appear after pressing the
i key, and not after the selection of a TV channel.
Picture mute
• Press the p or π keys to select a Blue or Black screen when there is no
picture or information.
• Press one of the colour menu keys repeatedly.
The
INSTALLATION menu reappears.
Fast exit from the menus
• Press one of the colour menu keys repeatedly to switch off all menus.
Surround Mode
Centre Mode
SETUP 1
Information Line
Picture mute
SETUP 2
