679212
11
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
11 GB/IE
Installing the dust extraction
hood (see Fig. E)
Insert the dust extraction hood
2
into the two
fastening grooves
16
on the tool arm
15
against
slight resistance.
Tighten the clamping screw
4
. The dust ex-
traction hood
2
is now firmly installed on the
tool arm
15
.
Adjusting the dust extraction
hood (see Fig. F)
Adjust the dust extraction hood
2
so dust or
sparks are not directed at the user.
The dust extraction hood
2
can cover the
grinding spindle from various angles. Use the
locking grooves
17
for this purpose.
Following installation, rotate the dust extraction
hood
2
toward the handle
6
according to
the application and the work piece. The dust
extraction hood
2
will lock into place in sev-
eral positions.
External extraction
EXPLOSION HAZARD!
A special dust extractor must be used for explosive
dust / air mixtures.
FIRE HAZARD DUE TO SPARKING! Do not
use dust extraction when working on metal.
FIRE HAZARD! Using power
tools which can be connected to a vacuum using a
dust extraction poses a fire hazard! Unfavourable
conditions, e.g. sparking - when grinding metal or
metal pieces in wood - can ignite wood dust inside
the vacuum bag. This can particularly occur if the
wood dust is mixed with paint particles or other
chemicals and the ground product is hot after long
work periods. Therefore be sure to avoid the ground
materials and the device from overheating and al-
ways empty the vacuum bag before taking breaks.
Wear a dust mask!
Connecting the dust extraction hose
Slide the vacuum adapter
9
into the connecting
piece
3
(see Fig. G).
Slide the hose from a reliable dust extraction
(e.g. a workshop vacuum) into the vacuum
adapter
9
.
Removing the dust extractor hose
Pull the hose out of the dust extraction unit.
Operation
RISK OF INJURY! Always
unplug from the mains before working on the sand-
ing brush.
Firmly hold the power tool with both hands whilst
working and ensure a solid stance. Holding the
power tool with both hands is safer.
Note the mains voltage! The voltage of the pow-
er source must correspond with the specifica
tions
on the type plate of the power tool.
Switching on / off
To switch on the power tool, slide the on / off
switch
7
forward so the switch shows “1“.
To save power, only switch on the power tool
when in use.
To switch off the power tool, slide the on / off
switch
7
back so the switch shows “0“.
Check the grinding tool before use.
The grinding tool must be properly installed
and rotate freely. Perform a test run of at least
1 minute without load. Do not use damaged,
untrue vibrating grinding tools. Damaged
grinding tools could burst and cause injuries.
Selecting the grinding tool
Select the grinding tool according to the shape of
surface to be worked on and the material to be sand-
ed. Match the grit with the desired material removal.
General power tool safety warnings / Start-up Start-up / Operation
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PSR-310-A1---IAN-271263

Zoeken resetten

  • Ik heb een psr310 a1 het hostel machine is zoo goed als nieuw maar de koolborstels zijn veer sleten dat jammer ik vind het een fijne machine wie kan mijn helpen aan die koolborstels Gesteld op 22-12-2022 om 23:53

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PSR 310 A1 - IAN 271263 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PSR 310 A1 - IAN 271263 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 2,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside PSR 310 A1 - IAN 271263

Parkside PSR 310 A1 - IAN 271263 Gebruiksaanwijzing - Français, Italiano - 51 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info