679212
9
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
9 GB/IE
General power tool safety warnings General power tool safety warnings
c) The rated speed of the attachment must
be at least the maximum speed speci-
fied on the power tool. Accessories turning
faster than the rating can break and fly about.
d) The outside diameter and thickness of
the attachment must correspond with
the specifications of the power tool. In-
correctly sized attachments cannot be properly
shielded or controlled.
e) Grinding discs, flanges, disc wheels or
other accessories must accurately fit
the grinding spindle on your power
tool. Attachments which do not accurately fit
the grinding spindle will rotate unevenly, vibrate
severely and can result in losing control.
f) Do not use damaged attachments. Be-
fore each use, check attachments such
as grinding discs for chips and tears,
disc wheels for tears, wear or severe
abrasion. If the power tool or the at-
tachment is dropped, check it for dam-
age or use an undamaged attachment.
After checking and installing the at-
tachment, you and persons nearby
should stay from the level of the rotat-
ing attachment, and allow the device
to run at maximum speed for a minute.
Damaged attachments typically break during
this test time.
g) Wear personal protective equipment.
Depending on the application, wear
full face protection, eye protection or
safety goggles. Where appropriate,
wear a dust mask, ear protection, pro-
tective gloves or a special apron to
deflect small grinding- and material
particles. Protect the eyes from foreign
objects flying about during various
applications. Dust- or respirator masks
must filter out the dust which arises
during use. Exposure to loud noise for extend-
ed periods can result in hearing loss.
h) Be sure other persons keep a safe dis-
tance to your work area. Anybody
entering the work area must wear per-
sonal protective equipment. Fragments
from the work piece or broken attachments can
fly about and cause injuries, including outside
the immediate work area.
i) Always hold the power tool by the in-
sulated handle surfaces when perform-
ing work where the attachment may
strikes hidden electric cables or the
power cored. Contact with a live wire may
also charge metal parts of the device and re-
sult in electric shock.
j) Keep the mains cable away from ro-
tating attachments. Losing control of the
device may result in the mains cable being cut or
caught, pulling your hand or arm into the rotat-
ing attachment.
k) Never put down the power tool until
the attachment has come to a complete
stop. The rotating attachment can come into
contact with the surface, resulting in a loss of
control over the power tool.
l) Do not run the power tool whilst car-
rying it. Clothing may get caught in the rotat-
ing tool due to accidental contact and the tool
pierce your body.
m) Regularly clean the ventilation slots
on the power tool. The motor fan will suck
dust into the housing, and a high accumulation
of metal dust can result in electrical hazards.
n) Do not use the power tool near flam-
mable materials. Sparks could ignite these
materials.
o) Do not use attachments requiring liquid
coolant. Using water or other liquid coolants
can result in electric shock.
Safety instructions for
grinding rollers
Hold the device by the insulated handle
surfaces, as the sanding sleeve may
strike the tool‘s mains cable. Damaging
a live wire may charge metal parts of the de-
vice and result in electric shock.
RISK OF FIRE DUE TO SPARKS! Grinding
metals produces sparking. Thus be very careful
not to endanger persons, and that no flamma-
bles are near the work area.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PSR-310-A1---IAN-271263

Zoeken resetten

  • Ik heb een psr310 a1 het hostel machine is zoo goed als nieuw maar de koolborstels zijn veer sleten dat jammer ik vind het een fijne machine wie kan mijn helpen aan die koolborstels Gesteld op 22-12-2022 om 23:53

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PSR 310 A1 - IAN 271263 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PSR 310 A1 - IAN 271263 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 2,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside PSR 310 A1 - IAN 271263

Parkside PSR 310 A1 - IAN 271263 Gebruiksaanwijzing - Français, Italiano - 51 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info