679212
10
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
10 GB/IE
When working on wood, and especially when
working on materials which could produce
harmful dust, connect the device to a suitable
external dust extraction.
Ensure adequate ventilation when working on
plastics, paint, lacquer, etc.
The sanding brush is designed for dry grinding
areas on wood, plastic, metal and spackle, as
well as painted surfaces. Only use the device
for dry grinding.
Do not work on materials containing asbestos.
Asbestos is considered carcinogenic.
TOXIC DUST! Dust from
materials such as lead paint, some types of
wood, minerals and metal, can be noxious.
Touching or inhaling this type of dust can pre-
sent a danger to the user or persons nearby.
Wear safety glasses and
a dust mask!
Secure the work piece. Use clamps or a vice to
secure the work piece. This is much safer than
holding it in your hand.
Never place your hands next to or in front of
the device and the surface you are working on,
as slipping poses a risk of injury.
In the event of danger, immediately pull the mains
plug out of the socket.
Always run the mains cable away from the
appliance and toward the rear.
Avoid contact with the sanding sleeve in motion.
Do not work on moistened materials or damp
surfaces.
Always apply the device to the working surface
when switched on. When the task is complete,
lift the appliance off the work piece before
switching it off.
Always firmly hold the device with both hands
whilst working. Ensure you have a solid stance.
Allow the device to come to a complete stop
and switch off before putting it down.
Always unplug from the mains socket before
taking breaks, especially working on the de-
vice (e.g. replacing sandpaper) and during
non-use.
Start-up
RISK OF INJURY! Always
unplug from the mains before working on the sand-
ing brush.
Installing / replacing grinding
tools (see Fig. A–C)
Activate the spindle lock
5
(until it locks in)
and use the hexagonal key
10
to loosen the
clamping screw
14
.
Now remove the clamping screw.
Now remove the grinding tool.
Install the respective grinding tool accordingly,
in reverse order.
Activate the spindle lock
5
(until it locks in)
and use the hexagonal key
10
to tighten the
clamping screw
14
.
Attach the slatted grinding discs
11
directly onto
the grinding spindle
1
.
First mount the shank
13
into spindle
1
, then
insert the sanding sleeves
12
onto the shank.
Installing sanding sleeves
(see Fig. D)
Follow the direction of slats and turn the sand-
ing sleeve
12
over the mounting shank
13
until
the rubber slats are completely covered.
Removing the sanding sleeves
Be sure the mounting shank
13
remains inside
the spindle
1
during removal.
To replace or remove an old sanding sleeve
12
,
first activate the spindle lock
5
until it locks in.
Then using a rotating motion following the direc-
tion of the slats on the mounting shank
13
to pull
off the sanding sleeve
12
.
General power tool safety warnings / Start-up Start-up / Operation
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PSR-310-A1---IAN-271263

Zoeken resetten

  • Ik heb een psr310 a1 het hostel machine is zoo goed als nieuw maar de koolborstels zijn veer sleten dat jammer ik vind het een fijne machine wie kan mijn helpen aan die koolborstels Gesteld op 22-12-2022 om 23:53

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PSR 310 A1 - IAN 271263 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PSR 310 A1 - IAN 271263 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 2,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside PSR 310 A1 - IAN 271263

Parkside PSR 310 A1 - IAN 271263 Gebruiksaanwijzing - Français, Italiano - 51 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info