INSTALLING OTHER SEQUENCES
You can program the Topline 8 to issue a sequence of commands at the
press of a key. For example, you may want to turn on your Satellite and TV
at the same time then set your TV to programme 5. Any sequence of
commands you regularly use can be reduced to one key stroke for your
convenience. The keys labeled Audio and Video are for installing Sequences.
To set up a Sequence:
PRESS: DISPLAY WILL READ:
1. HOLD MAGIC TIMED SEQ
2. MENU- x 2 CONFIGURE
3. ENTER THEATR SEL
4. MENU- x 4 KEY SEQ
5. ENTER SEL SEQKEY (select sequence key)
6. AUDIO (or VIDEO) ENTER SEQ
7. Enter the sequence of commands in the order you want them to activate.
For the example mentioned above, you would press:
SAT + POWER + TV+ POWER + 5 (enter the channel number exactly as
you would on your original remote). While you are entering the
sequence, the display will read [ESC TO END]. Press ESC to save.
The display will return to the main screen.
Deleting A Sequence
To erase any Sequence from a key, repeat steps 1-6 above, then press ESC to
save.
20
Advanced Functions
Notes:
- Once you program a Sequence on a specific key, the sequence will work
regardless of the mode (TV, VCR, SAT, etc.) you are in.
- If your original remote requires that you press a number key to turn on
your device, you should do this in place of pressing Power.
- If you have placed an extended function on a key using “Key Magic” and
then include this key in a Sequence, the extended function will be
included in the Sequence NOT the original function of this key.
- Besides the Audio and Video key, you can install a Sequence on any key
EXCEPT the following: TV, VCR, SAT, AUX1, AMP, TUN, CD, AUX2, HOME
THEATER, MAGIC, ESC, LITE, ENTER, SHIFT, SCAN.
