512556
26
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
26
Diesel fuel flow sensor kit Installation and Operation Manual
NAVMAN
7-3-3 Locating the sensors in the
fuel lines
The supply sensor will be installed in the fuel
supply line between the the primary fuel filter
and the engine fuel intake. The return sensor
will be installed in the fuel return line between
the engine fuel return and the fuel tank. There
are several options where to locate each
sensor, discussed below, and the best option
will depend on the layout of your engine’s fuel
system and what fittings are used. Because
there is so much variation in fuel systems, this
can only be a guide to where the sensor should
be located. If in doubt, consult a qualified diesel
engineer.
Locating the supply sensor
Before planning where to install the sensor,
identify the supply line of the fuel system:
Find the primary filter - this will be in the
fuel line coming from the fuel tank, before
the lines reach the engine. To meet
modern recommendations these lines will
probably be of metal tubing, not flexible
hose. The primary filter is typically large
and has a clear sightglass and water and
sediment separation bowl. It should be
fixed firmly to the structure of the boat.
Find the outlet of the primary filter
- this should be labelled on the filter.
Sometimes there is a one-way or
non-return valve fitting on the outlet also.
Identify the fuel supply line from the
primary filter to the engine. A solid fuel
line usually has a flexible portion joining it
to the engine.
There are four options of locating the supply
sensor in the supply line:
1 On the outlet of the primary filter (see a
below).
2 In the solid fuel line between the primary
filter and the engine (see b below).
3 At the junction of the solid pipe and the
flexible hose leading to the engine (see c
below).
4 After the lift pump (see d below).
Locating the return sensor
Before planning where to install the sensor,
identify the return line of the fuel system. This
return line will most probably start from the
injector body on the engine, have a flexible
section to take account of engine movement,
then return to the tank in solid wall pipe.
There are three options of locating the return
sensor in the return line:
1 At the junction of the solid pipe and the
flexible hose leading from the engine (see
c below).
2 In the solid fuel line between the engine
and the tank (see b below).
3 On the return inlet of the fuel tank (see e
below).
Sensor mounting positions
This section discusses issues relating to the
different mounting positions for supply or
return sensors.
a On the outlet of the primary filter
(supply sensor only)
Install the sensor after any one-way or non-
return valve fitting on the outlet of the filter.
This might be the best option if the fuel line
is all flexible.
Note:
You have to recognise and obtain the
correct fitting to match the fitting on the
outlet of the filter.
The diesel flow sensor has a female
thread. Connection to a filter with a
female thread outlet, will require two
fittings, a male to free rotating female and
a male to male.
Ensure there is little strain on the sensor
or the filter. When using solid fittings, the
sensor mounting block must be made
accurately and the sensor positioned
accurately. If the installation requirements
allow, use a short length of flexible fuel
hose between the filter outlet and the
sensor.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Navman Diesel Fuel Flow Sensors bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Navman Diesel Fuel Flow Sensors in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Navman Diesel Fuel Flow Sensors

Navman Diesel Fuel Flow Sensors Gebruiksaanwijzing - Nederlands - 32 pagina's

Navman Diesel Fuel Flow Sensors Gebruiksaanwijzing - Deutsch - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info