493509
9
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
1 +12V TRIGGER OUT: The +12V TRIGGER OUT is used for controlling
external equipment that is equipped with a +12V trigger input. This output
will be 12V when the C 725BEE is ON and 0V when the unit is either OFF or
in standby. This output can drive a load up to 150mA at 12V.
2 IR IN/OUT: These mini-jacks accept and output remote-controlled
codes in electrical format, using industry-standard protocols, for use
with “IR-repeater” and multi-room systems and related technologies.
IR IN: This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the C 725BEE from a remote location.
IR OUT: When connected to the IR IN of an ancillary equipment, direct
the ancillary equipments own remote control to the C 725BEE’s infrared
receiver to command or control the linked unit.
All NAD products with IR IN/IR OUT features are fully compatible with
the C 725BEE. For non-NAD models, please check with your other
product’s service specialists as to their compatibility to the C 725BEE’s
IR features.
3 MP INPUT: Input for a Media Player or other line-level signal source.
Use a twin RCA-to-RCA lead to connect the Media Player’s left and right
Audio Outputs” to this input. The MP input is also the assigned port
where the optional NAD IPD 1’s AUDIO OUT could be connected.
With the NAD IPD 1’s DATA PORT connected to the corresponding rear
panel’s DATA PORT socket, your iPod player docked in the NAD IPD
1 and the C 725BEE set to “MP mode, you can start listening to your
iPod’s playlist. Refer also to LISTENING TO YOUR iPod PLAYER under the
OPERATION main heading.
4 CD INPUT: Input for a CD or other line-level signal source. Use a
twin RCA-to-RCA lead to connect the CD player’s left and right Audio
Outputs” to this input.
5 DISC INPUT: Input for additional line level input signals such as CD,
Mini Disc player or the output signal from a step-up amplier for a
turntable. Use a twin RCA-to-RCA lead to connect the auxiliary units left
and right Audio Outputs” to this input.
6 AUX INPUT: Input for additional line level input signals such as
another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary
unit’s left and right Audio Outputs’ to this input.
7 TAPE: Connections for audio tape recorder playback of any type. Using
twin RCA-to-RCA leads, connect to the left and right Audio Output of
the tape machine to the TAPE sockets for playback.
8 REC OUT/ZONE 2: Doubles as both a RECORD and ZONE output port.
As a RECORD output, the Source signal directed to this output could
be used for making audio recordings. As a Zone output, it sends zone
selected audio sources to the corresponding audio input of another
separate zone. Use high quality patch cables to reduce noise pickup
over long distance runs.
9 PRE OUT: Connections to an external power amplier or processor,
such as a surround-sound decoder. In normal use, this should be
connected to the Main In sockets (No. 10) with the links supplied. To
connect your NAD C 725BEE to external processor or amplier sections,
remove rst these links. Use a twin RCA-to-RCA lead to connect the left
and right Audio Input of a power amplier or processor to the PRE OUT
sockets.
NOTE
Always turn the C 725BEE and associated external power ampliers OFF
before connecting or disconnecting anything to the PRE OUT and MAIN
IN sockets. The PRE OUT output signal will be aected by the C 725BEE’s
volume and tone control settings.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the C 725BEE is powered o or unplugged before making any connections. It is also advisable to power-down or unplug all
associated components while making or breaking any signal or AC power connections.
16
1 432 5 6 7 8 9 10 11 12 13 14
17 18 19 20 21
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD C 725 BEE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD C 725 BEE in de taal/talen: Engels als bijlage per email.

De handleiding is 1,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD C 725 BEE

NAD C 725 BEE Gebruiksaanwijzing - Nederlands - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Deutsch - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Français - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Espanõl - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Svenska - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info