493509
7
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
1 STANDBY: With the rear panel POWER switch set to ON position, press this
button to switch ON the C 725BEE from standby mode. The Standby LED
indicator will turn from amber to blue and illuminate the VFD. Pressing the
[Standby] button again turns the unit back to standby mode.
The C 725BEE can also be switched ON from standby mode by pressing
any of the front panel buttons.
2 STANDBY LED: This indicator will light up amber when the C 725BEE
is in standby state. When the C 725BEE is at ON state, this indicator will
illuminate blue. When infrared command from the SR 8 is received, this
indicator will also ash momentarily.
In cases of serious abuse of the C 725BEE, such as excessively low
loudspeaker impedance and short circuit, the C 725BEE will engage its
Protection circuitry, indicated by the Standby LED turning from blue to
red and the sound being muted. At Protect mode, the Standby LED in
red color will ash and “Protect!” shown ashing also in the VFD. In the
case of overheating, the Standby LED in red color will ash and the VFD
turned o.
In such a case, turn the C 725BEE o by the rear panel POWER button,
wait for it to cool down and/or check the speaker connections,
making sure the overall loudspeaker impedance doesn’t go below 4
ohms. Once the cause for the protection circuitry to engage has been
removed, switch ON the rear POWER button and the Standby Button to
resume normal operation.
3 BLEND: The NAD BLEND feature will allow you to reduce the amount of
noise and hiss but still retain some level of stereo separation, instead of
mono. The BLEND button toggles between engaging and disengaging
the BLEND feature. When engaged, “Blend On” is shown at the lower line
of the VFD; “Blend O when not active. The “Blend On” or “Blend O
status can be stored for individual presets.
4 INFO: Toggle this button for the lower line of the VFD to show various
settings, conditions and other information relevant to the currently
tuned station or broadcast.
5 MEMORY: Press this button to store tuned AM, FM and digital radio
stations to the C 725BEE’s 40 preset-memory locations. One can store a
mix of any AM, FM and DAB broadcasts to the 40 available presets.
In combination with [INFO] button, [MEMORY] button is also used in
deleting stored presets. Press and hold [INFO] button and then press
[MEMORY] – current stored preset setting will be erased. Refer also to
the item about SETTING RADIO PRESETS at the LISTENING TO AM/FM
RADIO section of the OPERATION page.
6 TUNER MODE: In FM mode, toggle this button to switch between
“FM Mute On (stereo) and “FM Mute O (mono). Select “FM Mute O
for stations that have too much interference or are too weak. When
engaged, “FM Mute On is shown at the lower line of the VFD; “FM Mute
O when not active. The “FM Mute On or “FM Mute O status can be
stored for individual presets. Refer also to the item about CHOOSING
TUNER MODE at the LISTENING TO AM/FM RADIO section of the
OPERATION page.
In DAB mode, pressing this button will activate Dynamic Range Control
(DRC), Station Order or other applicable DAB menu options. Refer also
to the item about DAB TUNER MODE at the LISTENING TO DAB RADIO
section of the OPERATION page.
7 PRESET [ ] : Press to step up or down between stored radio
presets; 40 presets are available. Note that this function “wraps”: Pressing
[PRESET ] will step from Preset 1 to Preset 40 or vice versa. “Unused”
presets are skipped over.
8 TUNE [ ] : Toggle either button to step up or down between
AM or FM frequencies. Press and release [TUNE ] to search up or
down - the C 725BEE will stop at the next suciently strong signal it
encounters. Note that this function wraps – that is, it will continue to
search from one end of the AM or FM band to the other until it stops
at a strong signal. Pressing [TUNE ] during the search process will
stop the search. Refer also to “OPERATION – LISTENING TO DAB RADIO”
for [TUNE ] usage in DAB operation.
9 VACUUM FLUORESCENT DISPLAY (VFD): Provide visual information
about the unit’s important modes, settings, functions, status of the
current source and other indicators. When in tuner mode, it displays
information about the current station or broadcast as supplied by the
service provider among other tuner settings.
IDENTIFICATION OF CONTROLS
FRONT PANEL
1 9
19181713 14 15 16
2 3 4 5 6 7 8 10 11 12
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD C 725 BEE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD C 725 BEE in de taal/talen: Engels als bijlage per email.

De handleiding is 1,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD C 725 BEE

NAD C 725 BEE Gebruiksaanwijzing - Nederlands - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Deutsch - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Français - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Espanõl - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Svenska - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info