16
After the entry delay time the network connection needs to be set up, which
makes the receipt time slightly longer. As default, the entry delay time is set
to 15 seconds.
5.6 EXIT DELAY TIME
The exit delay time defines the time between the moment of switching on
the module and the moment the module is able to send the first alarm
message. The time can be set between 0 and 999 seconds. As default, the
exit delay time is set to 120 seconds.
5.7 INACTIVE TIME
The “inactive time” defines the time an input is not active after an activation.
During the inactive time, no new alarm message will be sent. The motion
detector itself has an inactive time of 2 minutes. It can be set between 0 and
60 minutes. As a factory setting this time is set to "0", meaning that the 2
minutes of the Optex alarm are valid.
5.8 CALL AND/OR SMS (OWN SIM CARDS)
When using your own SIM card, by default the Outdoor Alarm will call and
send SMS text messages. It is possible to suppress one of these. By turning
off the CALL, the unit will only send SMS text messages. By turning off the
SMS, it will only call. The default both values are set to "ON".
5.1 NOTIFICATION TO PRIVATE EMERGENCY CENTER
The Mobeye Outdoor Alarm can send the reports to a control room using
the standard SIA DC09 protocol. This requires the use of the Mobeye
SIM/Portal. Contact Mobeye for information.
