738663
44
Verklein
Vergroot
Pagina terug
1/146
Pagina verder
16 Advanced operations
reception of a correct CTCSS/DCS signal, with CTCSS/DCS incor-
rect, etc.). For details about the BCLO operation please refer to the
paragraph 5.6.b
7.2 Handsfree transmission (VOX)
VOX (Voice Operated eXchange) is a device that allows you to automati-
cally switch the transmission in hands free mode just by speaking in the
built-in microphone of a headset (not provided with the unit) connected
to your transceiver. Once you have finished to talk, the VOX automatically
switches the radio on reception.
Ensure that the headset with microphone you are going to use is
suitable to your transceiver as stated in the paragraph 9.1
7.2.a Headset Connection
1) With a suitable screwdriver, unscrew the screw that holds the cover
cap of the accessory connector (item [7] of the paragraph 3.3)
2) Keep the cover cap in a safe place and connect the headset/micro-
phone to the accessory connector (for details about the contacts
layout please refer to the paragraph 9.1.a).
In order to avoid damages to the device, put the cover cap in its
place again when the accessory connector is not used.
7.2.b Enabling/disabling VOX
1) Ensure that the headset is properly connected and that the headset’s
built-in microphone is located close to the side of your mouth.
2) Switch on the radio on keeping pressed the FUNC button.
3) When the device is switched on, release the button.
7.2.c Adjusting VOX sensitivity
1) Enable the VOX as described above
2) Briefly press the FUNC button to select one of two VOX sensitivity
levels (high/low).
3) Perform some tests in order to ensure a stable transmission when
speaking with a normal voice level, but avoiding accidental transmis-
sions.
We recommend to set just the minimum sensitivity as possible.
A too high value could cause accidental transmissions, espe-
cially in hi-noise environments.
The transceiver isn’t provided with any indication of LOW/HIGH VOX
sensitivity
PTT button is disabled during VOX operation.
7.3 Confidential Communications (scrambler)
Your transceiver could have been programmed to use the scrambler
when necessary. This is a device that make your communications unin-
telligible to normal receivers/transceivers, but perfectly clear to the other
radios of your network, that obviously must belong to the HPx06 family
(i.e. equipped of the same type of scrambler).
To enable the scrambler:
1) Ensure that the other party enables his/her scrambler too.
2) Simultaneously and briefly press the MON and FUNC buttons. The
device will send a high-pitched beep to confirm that the scrambler is
enabled.
To disable the scrambler:
English
ISTR106_int 26-09-2003 9:47 Pagina 16
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Midland Alan HP 406 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Midland Alan HP 406 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info