738663
42
Verklein
Vergroot
Pagina terug
1/146
Pagina verder
14 CTCSS/DCS and Selective Call operation
6 CTCSS/DCS and Selective Call operation
6.1 Reception
The radio may be set-up so that, during the operation with the
CTCSS/DCS and/or Selective Call, audio is enabled only when you recei-
ve the appropriate CTCSS/DCS tone and/or Selective Call. Speaker will
then remain muted until the correct CTCSS tone, the correct DCS code
and/or the appropriate selective call is received. As soon as this condi-
tion takes place, the speaker will be unmuted allowing you to hear the
message and the status LED will glow amber. In case of reception of
signals without the correct tone, the speaker will remain muted and the
status LED will glow green.
Depending on the programming, you can temporarily disable the
CTCSS/DCS and the selective call in order to monitor the radio traf-
fic. For details please refer to the paragraph 5.5.
6.2 Transmission
6.2.a CTCSS/DCS transmission
If your transceiver has been programmed to transmit a CTCSS tone or a
DCS code, it is not necessary to do anything. The CTCSS tone or the
DCS code is automatically sent every time you transmit (the device does
not show this condition).
6.2.b Sending a normal selective call
On your transceiver the MON and FUNC buttons could have been pro-
grammed to send, respectively, the selective call Nr.1 and Nr.2.
To send a selective call:
1) Ensure that the channel is not busy (otherwise you will cause an inter-
ference), verifying that the status LED is not glowing green or amber.
If the channel is not free, please wait until that condition takes place
(LED turned-off)
2) Keep the MON or FUNC button pressed until the device will produce
a beep (about 3 seconds), then release the button. The default
address of every button is automatically recalled.
During a call, the transceiver turns automatically on the transmission
(the status LED glows red), so it is not necessary to press the PTT but-
ton.
6.2.c Sending an emergency selective call
If your transceiver has been programmed to send an emergency selecti-
ve call, you can send it by simultaneously pressing for a long time both
the MON and FUNC buttons until you will hear a beep and the status
LED will glow red, then release the buttons. The transceiver will send the
emergency selective call.
Please use the emergency selective call only if a real condition
requires its use. Please agree its use with your radio network
manager.
During a call the transceiver turns automatically on the transmission
(the status LED glows red), so it is not necessary to press the PTT but-
ton
English
ISTR106_int 26-09-2003 9:47 Pagina 14
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Midland Alan HP 406 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Midland Alan HP 406 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info