595375
17
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
ENGLISH
17
ENG
7.6 Extraction connection piece / dust
ejection
The nozzle (12) can be rotated to the desired posi-
tion to extract or eject chips. To do this, push the
nozzle in up to the stop, turn and pull out again.
The nozzle can be locked in 45° increments so that
it cannot turn.
Sawdust extraction:
connect a suitable dust extraction unit with suction
hose to the machine to extract the sawdust.
8.1 Switching on and off
Switching on:
Press locking button (10) and hold
in; then actuate the trigger (11).
Switching off:
Release the trigger (11).
8.2 Signal display (KSE 68 Plus)
The signal display (13) lights up briefly when the
machine is switched on and indicates operational
readiness. If the signal display lights up during
operation, this indicates overloading. Reduce the
load on the machine.
8.3 Working instructions
Lay out the mains cable such that the cut can be
executed without obstruction.
For this purpose, the mains cable can be held by
the cable guide (9).
The markings (17) are designed to help the user
when positioning the machine and sawing the
workpiece. In the case of maximum depth of cut,
they mark approximately the outside diameter of
the saw blade and thus the cutting area.
Do not switch the machine on or off while the
saw blade is touching the workpiece.
Let the saw blade reach its full speed before
making a cut.
When the hand-held circular saw is added, the
movable safety guard is swung backwards by the
workpiece.
KSE 68 Plus: the movable safety guard can be
swung backwards manually using the lever (8) to
make the machine easier to position on the work-
piece.
When sawing, never remove the machine
from the material with the saw blade turning.
Allow the saw blade to come to a standstill.
If the saw blade blocks, turn the machine off
immediately.
Sawing along a straight line:
the cutting indicator is used here (5). The width of
the cutting indicator represents roughly the width
of the saw disc.
Sawing along a rail secured on the workpiece:
In order to achieve an exact cutting edge, you can
attach a rail to the workpiece and then guide the
hand-held circular saw along this rail by means of
the guide plate (1).
Sawing with parallel stop:
For cuts parallel to a straight edge.
The double parallel stop (7) can be inserted from
either side into the support provided for it.
Main-
tain parallelism to the saw blade when making
the setting.
Retighten the front and then the rear
locking screw (3). It is best to calculate the exact
cut width by making a test cut.
For cuts parallel to a straight workpiece edge:
Apply the parallel stop (7) such that the stop rail is
facing down.
For cuts parallel to a straight edge on the work-
piece: Apply the parallel stop (7) such that the stop
rail is facing up.
8.4 Sawing with guide rail 6.31213
For straight and splinter-free cutting edges accu-
rate to the millimetre. The anti-slip coating keeps
the surface safe and protects the workpiece
against scratches. The machine can be placed
against the stops on the guide rail for plunge
cutting and cuts can be executed with a uniform
length.
For guide rail 6.31213, see
chapter on Accesso-
ries.
Depending on the application type and cutting
width, the parallel stop (7) can be inserted from the
right or left into its holder.
Sawing very narrow sections:
Insert the parallel stop (7) from the right into its
holder.
Clean the machine regularly. This includes vacuum
cleaning the ventilation louvres on the motor.
Changing saw blades
Pull the plug out of the plug socket before
any adjustments or servicing are performed.
- Press in the spindle locking button (28) and hold
in place. Turn the saw spindle slowly with the
8Use
9 Tips and Tricks
10 Maintenance
17026944_0209 KSE 6x Plus MG-Guss.book Seite 17 Montag, 26. Januar 2009 2:08 14
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KS Plus PartnerEdition bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KS Plus PartnerEdition in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info