63124
17
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
1313
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTION
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
ADVANCED
OPERATION
ENGLISH
TUNER OPERATION (PRESET MEMORY)
With this unit you can preset up to 50 FM/AM stations
in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
DISP AUTO TUNED ST
SLEEP DIRECT
2. 4. 5.2.1. 3.
1.
To select FM, press the BAND button on the
front panel.
2.
While pressing the MEMORY button, press the
TUNING/PRESET 3 button.
AUTO PRESET” will appear on the display,
and scanning starts from the lowest frequency.
3.
Each time the tuner fi nds a station, scanning
will pause and the station will be played for fi ve
seconds.
During this time, the following operations are
possible.
The band can be changed by the BAND button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
01.
If you wish to skip the current station, press the
TUNING/PRESET 3 button during this period,
this station is skipped and auto presetting
continues.
5.
Operation stops automatically when all 50
preset memory positions are fi lled or when auto
scanning attains the highest end of all bands.
If you desire to stop the auto preset memory at
anytime, press the CLEAR button.
Note:
It is possible that existing preset memory positions
will be overwritten.
MANUAL PRESET MEMORY
D
ST
2. 4.3.
2
.
3
.
(Using the unit)
1.
Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING
section).
2.
Press the MEMORY button on the front panel.
– –“ (preset number) starts blinking on the
display.
3.
Select the preset number by pressing the
TUNING/PRESET 3 or 4 buttons, while this
indicator is still blinking (approx. 5 seconds)
4.
Press the MEMORY button again to enter. The
display stops blinking.
The station is now stored in the specified
preset memory location.
(Using the remote controller)
1.
Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING
section).
2.
Press the MEMO button on the remote
controller. “– –“ (preset number) starts blinking
on the display.
3.
Enter the desired preset number by pressing
the numeric buttons.
Note:
When entering a single digit number (2 for example),
either input “02” or just input “2” and wait for a few
seconds.
RECALLING A PRESET STATION
DISP AUTO TUNED ST
SLEEP DIRECT
1. 1.
1.
(Using the unit)
1.
Select the desired preset station by pressing
the F/P button and TUNING/PRESET 3 or 4
buttons on the front panel
(Using the remote controller)
1.
Press the 1 or 2 buttons to select the desired
preset station, or input your desired preset
channel with the numeric buttons on the
remote controller.
PRESET SCAN
3.
1.
3.
3.
(Using the remote controller)
1.
Press the P.SCAN button on the remote
controller.
PRESET SCAN” appears on the display and
then the preset station with the lowest preset
number is recalled fi rst.
2.
Preset stations are recalled in sequence (No.1
No.2 etc.) for 5 seconds each.
No stored preset number will be skipped.
3.
You can fast forward the preset stations by
pressing the 2 button continuously.
When the desired preset station is received,
cancel the preset scan operation by pressing
the CLEAR button or P.SCAN button on the
remote controller.
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
3.2.
3.
2.
1.
Recall the preset number to be cleared with
the method described in “Recalling” a preset
station.
2.
Press the MEMORY button on the front panel
or press the MEMO button on the remote
controller.
3.
The stored preset number blinks in the display
for 5 seconds. While blinking, press the
CLEAR button on the front panel or the remote
controller
.
4.
xx CLEAR” appears on the display to indicate
that the specified preset number has been
cleared.
Note:
To clear all stored preset stations, press and hold the
CLEAR and the F/P buttons on the front panel for
two seconds.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Marantz-SR5023

Zoeken resetten

  • Bij het inschakelen springt hij op PROTECT, gaat het standby-lampje knipperen en kan ik verder niets meer. Hoe dit te verhelpen? Gesteld op 16-9-2012 om 18:39

    Reageer op deze vraag Misbruik melden
    • Ook mijn Marantz receiver SR5023 springt de laatste maan op 'protect' bij het inschakelen.

      Na enkele malen via de afstandsbediening opnieuw pogen lukt het pas.

      Ik kan in de handleiding of op internet nergens de reden vinden.

      Pierre Hendriks Geantwoord op 28-9-2013 om 16:33

      Waardeer dit antwoord (9) Misbruik melden
    • Ook ik heb dit probleem nu. Soms springt na circa een halve minuut de radio toch aan. Soms blijft het lampje knipperen en gebeurd er niets. Draai ik dan aan de grote linker knop richting bijvoorbeeld CD dan gaat de radio wel aan. Maar goed lijkt mij dit niet. Vandaag een monteur laten kijken. Meer dan drie seconden de s-direct toets en de mute-toets gelijktijdig ingedrukt houden. Er vind een soort van reset plaats. Maar ook dit heeft niet geholpen. Heeft iemand een idee hoe dit op te lossen. Ik wil evt. de monteur wel weer inschakelen, maar ben bang dat het duur wordt. Dit apparaat nu 2,5 jaar in bezit, dus de garantie zal wel verlopen zijn? Geantwoord op 8-10-2014 om 20:41

      Waardeer dit antwoord (22) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR5023 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR5023 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Marantz SR5023

Marantz SR5023 Gebruiksaanwijzing - Nederlands - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info