63124
15
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
1111
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTION
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
BASIC
OPERATION
ENGLISH
TUNER OPERATION
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 9 kHz step, if your country’s standard
is 10 kHz step, Press BAND button on the remote
controller more than 6 seconds. Scan step will
change.
Note:
Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
S
P AUTO TUNED ST
L
EEP DIRECT
1. 2.
2.
1.
(Using the unit)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2.
Press the TUNING/PRESET
3 or 4 buttons
on
the front panel for more than 1 second to start
the auto tuning function.
3.
Automatic searching begins then stops when a
station is tuned in.
(Using the remote controller)
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the
3 or 4
for more than 1 second on the
remote controller.
3.
Automatic searching begins then stops when a
station is tuned in.
If tuning does not stop at the desired station, use to
the “Manual tuning” operation.
MANUAL TUNING
ISP AUTO TUNED ST
SLEEP DIRECT
1. 2.
2.
1.
(Using the unit)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2.
Press the TUNING/PRESET
3 or 4 buttons
on
the front panel to select the desired station.
(Using the remote controller )
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the
3 or 4
on the remote controller to
tune in the desired station.
DIRECT FREQUENCY CALL
2
.
1
.
3
.
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the F.DIRECT on the remote controller,
display will show “FREQ - - - -”.
3.
Input your desired station’s frequency with the
numeric buttons on the remote controller.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
A
UTO TUNED ST
DIRECT
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The “ST” indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be diffi cult to tune into
the station in stereo. In such a case, press the
T-MODE button on the front panel or remote
controller.
AUTO” indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the “ST
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE button on the remote
controller
again. AUTO indicator is illuminated on the
display.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Marantz-SR5023

Zoeken resetten

  • Bij het inschakelen springt hij op PROTECT, gaat het standby-lampje knipperen en kan ik verder niets meer. Hoe dit te verhelpen? Gesteld op 16-9-2012 om 18:39

    Reageer op deze vraag Misbruik melden
    • Ook mijn Marantz receiver SR5023 springt de laatste maan op 'protect' bij het inschakelen.

      Na enkele malen via de afstandsbediening opnieuw pogen lukt het pas.

      Ik kan in de handleiding of op internet nergens de reden vinden.

      Pierre Hendriks Geantwoord op 28-9-2013 om 16:33

      Waardeer dit antwoord (9) Misbruik melden
    • Ook ik heb dit probleem nu. Soms springt na circa een halve minuut de radio toch aan. Soms blijft het lampje knipperen en gebeurd er niets. Draai ik dan aan de grote linker knop richting bijvoorbeeld CD dan gaat de radio wel aan. Maar goed lijkt mij dit niet. Vandaag een monteur laten kijken. Meer dan drie seconden de s-direct toets en de mute-toets gelijktijdig ingedrukt houden. Er vind een soort van reset plaats. Maar ook dit heeft niet geholpen. Heeft iemand een idee hoe dit op te lossen. Ik wil evt. de monteur wel weer inschakelen, maar ben bang dat het duur wordt. Dit apparaat nu 2,5 jaar in bezit, dus de garantie zal wel verlopen zijn? Geantwoord op 8-10-2014 om 20:41

      Waardeer dit antwoord (22) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marantz SR5023 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marantz SR5023 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Marantz SR5023

Marantz SR5023 Gebruiksaanwijzing - Nederlands - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info