782325
13
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
Technical and legal
information
MSTS1500-A by MacAllister
that your hand remains at a safe distance to the saw blade.
e) Use only the supplied push stick of the manufacturer. The push stick
provides sufficient distance of the hand from the saw blade.
f) Never use a damaged or cut push stick. A damaged push stick may break
causing your hand to slip into the saw blade.
g) Do not perform any operation"freehand". Always use either the ripping
fence or the mitre gauge to position and guide the workpiece. "Freehand"
means using your hands to support or guide the workpiece, in lieu of a ripping
fence or mitre gauge. Freehand sawing leads to misalignment, binding and
kickback.
h) Never reach around or over a rotating saw blade. Reaching for a workpiece
may lead to accidental contact with the moving saw blade.
i) Provide auxiliary workpiece support to the rear and/or sides of the saw
table for long and/or wide workpieces to keep them level. Long and/or
wide workpieces have a tendency to pivot on the table's edge, causing loss
of control, saw blade binding and kickback.
j) Feed the workpiece at a uniform speed. Do not bend or twist the
workpiece. If the saw blade jams, immediately switch off the power tool,
pull the mains plug and clear the jam. If the workpiece causes the jamming
of the saw blade, this could lead to kickback or stalling of the motor.
k) Do not remove piece of cut-off material while the saw is running. The
material may become trapped between the saw blade and fence or in the
guard and pull your fingers into the saw blade. Turn the saw off and wait until
the saw blade stops before removing the material.
I) Use an auxiliary fence for long cuts in workpieces with a thickness of
less than 2 mm. Thin workpieces may wedge under the fence and create
kickback.
3. Kickback causes and related warnings
Kickback is a sudden reaction of the workpiece due to a pinched, bound saw blade
or misaligned line of cut in the workpiece with respect to the saw blade or when
a part of the workpiece binds between the saw blade and the fence or other fixed
object.
During kickback, in most cases, the workpiece is lifted off the table by the rear
portion of the saw blade and is propelled towards the operator.
Kickback is the result of incorrect or faulty use of the table saw. It can be prevented
if suitable precautionary measures are taken as described below.
Getting started...
13
EN
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mac Allister MSTS1500-A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mac Allister MSTS1500-A in de taal/talen: Engels als bijlage per email.

De handleiding is 4.82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info