5
Value# Function
60-69 GOBO6
70-79 GOBO7
80-89 GOBO8
90-99 GOBO9
100-109 GOBO10
110-119 GOBO11
120-127 GOBO12
128-183 CW FAST TO SLOW
184-239 CCW SLOW TO FAST
240-244 Sound triggering Fast mode
245-249 Sound triggering Slow mode
250-255 Sound triggering Standard speed mode
CH 3 GOBO
Value# Function
0-1 No function
2-127 GOBO Dimmer, SLOW TO FAST
128-255 GOBO Shaking, SLOW TO FAST
CH 4 Prism Motor Rotate
Value# Function
0 No function
1-63 FAST TO SLOW
64-127 SLOW TO FAST
128-239 Dimmer, SLOW TO FAST
240-244 Sound triggering Fast mode
245-249 Sound triggering Slow mode
250-255 Sound triggering Standard speed mode
Note: In DMX mode and SLAVE mode, the lamp will be blacked out automatically if there is no DMX
signal input.
SERVICE:
There are no user serviceable parts inside except the lamp. Refer all service to a qualied technician.
Lamp replacement:
1. Disconnect the xture from AC power and allow it to cool for 15 minutes.
2. Loosen the access screws and lift the cover.
3. Remove the base of the old lamp from the socket.
4. Install the new lamp: ELC 24V/250W GX5.3 halogen.
Push the lamp base pins fully, but gently, into the socket.
To ensure maximum lamp life, avoid touching the lamp with bare hands.