3
OPERATION:
Read “IMPORTANT INFORMATION BEFORE USE” rst and verify all precautions are fullled before
operating.
Make sure the correct lamp is installed, read “SERVICE” how to (re)place the lamp.
Although the QUAKE250 cannot be dimmed, it may be switched on and off remotely using switch
packs or the full-on and full-off levels on dimmer packs. Disconnect the xture from AC power when
not in use.
The QUAKE250 has an advanced control panel. To set the desired function please read the following
instructions carefully.
Power
Menu
DMX
Up Down
Enter
Sound
Control panel
DMX address setting:
1. Press
Menu
button to access address code setting menu
Axxxx
2. Press
UP
or
DOWN
button to set the
DMX
address code.
3. Press
ENTER
button to save the update
DMX
address code.
Address code setting range
A001-A512
Test program:
Press
Menu
button to access the test program, select the menu
TEST
and press
ENTER
button to
save the setting, the LCD display ashes.
Press
Menu
button to exit this scene.
Mode setting:
Press
Menu
button to acces the menu
Mode
and press
ENTER
button to save the setting.
Press
UP
or
DOWN
button to select the mode of
Auto
or
Sond
or
dMH
.
Press
ENTER
button to save the setting.
Press
Menu
button to upgrade the menu.
Auto
Automatic mode
Sond
Sound activity mode (w/o sound triggering will be black out)
dMH
DMX mode
Sound Activity Sensitivity Setting:
Press
Menu
button to access the menu
SEnS
Press
UP
or
DOWN
to select the sound sensitivity (range: 0-99)
Press
ENTER
to save the setting.
Note:
If the unit is in Master/Slave or Sound mode without any (music) triggering for 60 seconds, then
the unit will switch to black out mode.