640448
11
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
20 21
[...continued] Using the camera
4. Photo shooting
You can set the image resolution before taking photos. Press the “M” key to enter the setup interface, press the
“>” or “<” keys to move the cursor to
, select the menu “Image Resolution” and press the “OK” key to enter the
resolution setup menu. There are three resolution modes available for your selection:
3M: Photo shooting resolution of 2048 x 1536
5M: Photo shooting resolution of 2592 x 1944
8M: Photo shooting resolution of 3200 x 2400
Single shot: In preview mode, press the “Shutter” once to shoot a photo. You will hear a “Click”, the front
green indicator will flash once (the photo shooting icon on the LCD segment screen will also
flash once) and the system will return to the preview state
Triple Shot: Press the “M” key to enter the camera setup interface. Press the “>”or “<” keys to move the
cursor to
, press the “>” or “<” keys to select the menu “Tripple” and press the “OK” key to
confirm. Press the “M” key to exit the setup interface after setting. When the “Shutter” is
pressed once, the camera will then take three consecutive photos
Time-lapse mode: Press the “M” key to enter the camera setup interface, press the
, key to move the cursor to
, then press the “>” or “<” keys to select the menu “Continuous Shooting” and press the “OK
key to set the continuous shooting interval time at 2s, 3s, 5s, 10s, 20s or 30s. Press the “M
key to exit the setup interface after setting the interval time. When the “Shutter” button is
pressed, the camera will start shooting one photo every 2s, 3s, 5s, 10s, 20s, or 30s until the
button is pressed again to stop
Self-timer mode: Press the “M” key to enter the camera setup interface, press the “>” or “<” keys to move the
cursor to
, then press the “>” or “<” keys to select the menu “Self shot” and press the “OK
key to set the delay time at 0s, 5s or 10s. Press the “M” key to exit the setup interface after
setting the delay time. When the “Shutter” is pressed once, the camera will then start the
timer and shoot a photo at the end of the delay time
Note: If the memory space becomes full, the system will display the message “Out of Memory” on the TFT display
screen and return to the preview mode
5. Voice recording
Press the “M” key to enter the camera setup interface, select the menu “Capture Mode”, press the “OK” key to
enter the selection interface, press the “>” or “<” keys to select
, press the “OK” key to confirm your selection,
and finally press the “M” key to exit the setup interface. Press the “Record” key to start recording and the green
indicator will flash slowly, the TFT screen will display the voice recording icon and the timer will start.
After sound recording, press the “M” button to return to the system setting interface. Select the “Capture Mode”
menu and press “OK” to enter the selection interface. Press the “>” or “<” keys to select
, exit the voice mode
then press the “M” key to return to the preview interface.
Note: When the camera is restarted or it wakes up, it will recover to video recording mode
[continued...]
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kitvision Edge HD10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kitvision Edge HD10 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kitvision Edge HD10

Kitvision Edge HD10 Gebruiksaanwijzing - Nederlands - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Deutsch - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Français - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Espanõl - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info